Installation (Inside Vent)
If you do not have an outlet to the outside,
the exhaust pipe is not required and the
installation is similar to the one shown in the
section "Installation (Vent outside)".
0
Installation of Island Kitchen hood
•
Make sure of the installation position, x the hanging scaffold at the
proper position, and check the
rmness and smoothness of
installation. See the pic 1.
•
Adjust to the proper height, joint the bracket, and install it on the
hanging scaffold. See the pic 2.
•
Fix the inside kitchen hood on the hanging scaffold, enclose the
outside kitchen hood on it at the proper position, and insert a hook
into the bracket to x the outside kitchen hood temporarily. See the pic
3.
•
Fix the air outlet in the vent on the hood's body, and connect the
extensible pipe with the air outlet. See the pic 4.
•
Extend the hose out of the hanging scaffold, and x the hood's body
on the bracket. See the pic 5.
•
Detach the hook, and move the outside kitchen hood downward till
reaching the hood's body. Pay attention not to strike the glass. See the
pic 6.
•
Drill 2 x 8 mm holes to accommodate plate
II. Screw and tighten plate II onto the wall
with 2 screws are provided. Assemble the
kitchen hood onto the unit and x it with 2
screws.
