17
If connected successfully you will see this in terminal window, see the image:
Once you are connected press CTRL+C to disconnect from internet.
From next time,
1.
Plug in the device, eject it.
2.
sudo modprobe usbserial vendor=0x201e product=0x2009
3.
sudo wvdial .
4.
ctrl+ c to disconnect
Note the following user guide only implies to
Linux version 10.4 LTS
which comes with
kernel
2.6.32-23 Generic & above.
All below Linux OS versions will have to use Terminal to connect to internet, if not upgraded to
2.6.32-23 kernel.
1.
Plug in your device and you will notice the dialer on desktop , right click on the dialer and eject
it. (
Ejecting is compulsory
)
Summary of Contents for Olive VME101
Page 1: ...Olive VME101...
Page 12: ...12 Click Continue then install Then enter your laptop s password when pop up window appears...
Page 13: ...13 When installation is successful click on close button After clicking on close Dialer opens...
Page 19: ...19 4 Select Forward again without changing anything from drop down box...
