49
Procedure for digital clock setting :
Procedure for digital clock setting :
Procedure for digital clock setting :
Procedure for digital clock setting :
Procedure for digital clock setting :
1. The clock can be set using both the ‘SET’ and ‘MODE’ keys.
2. Pressing the ‘SET’ knob for 5 secs. will cause the displayed time to
flash i.e. clock setting mode.
3. At entry into clock setting mode, Hours digit will flash first.
4. While the Hours data is flashing, pressing and releasing the SET key
will toggle between minutes and hours.
5. While the numbers flashing, pressing the MODE the key will advance
the displayed number.
6. While the numbers are flashing, if no keys are pressed for 5 secs.
Then the current value displayed are stored and the display stops
flashing.
RPM meter :
RPM meter :
RPM meter :
RPM meter :
RPM meter :
The meter indicates engine speed in revolutions per minute (rpm)
Change gears at appropriate engine rpm and car speed to get optimum
fuel economy.
The permitted engine rpm upper limit is the start of Red Zone on the
dial.
I N D I C A T O R S A N D I N S T R U M E N T S
GA
GA
GA
GA
GAUGES
UGES
UGES
UGES
UGES
RPM Meter
Digital Clock
