82
Automatic Hub Locks
Automatic Hub Locks
Automatic Hub Locks
Automatic Hub Locks
Automatic Hub Locks
While driving in 2H mode this mechanism on the front axle
hub allows the hub to free wheel. This avoids the unnecessary
spinning of front drive components and results in fuel saving,
reduced noise and longer component life.
As soon as 4H or 4L mode is selected the hub gets
automatically connected to front drive line to increase the
traction.
Limited Slip Differential
Limited Slip Differential
Limited Slip Differential
Limited Slip Differential
Limited Slip Differential
(Standard on 4x4 and optional on others)
A standard differential delivers torque equally to each wheel.
In case one wheel loses traction and begins to spin, the
differential distributes the rotary speed unequally but with
same torque. This can cause the wheel with good traction to
slow down or stop while the wheel which lost traction rotates
with increased speed. Such a situation can prevent the vehicle
from moving.
The limited slip differential provided in the rear axle takes
care of such situations. The clutch lock arrangement provided
internally, ensures that in case one wheel loses traction and
begins to slip, a locking action takes place which prevents
differential action and both wheels turn at the same speed.
D R I V I N G
TR
TR
TR
TR
TRANSFER C
ANSFER C
ANSFER C
ANSFER C
ANSFER CASE
ASE
ASE
ASE
ASE,,,,, AUT
AUT
AUT
AUT
AUTOMA
OMA
OMA
OMA
OMATIC HUB L
TIC HUB L
TIC HUB L
TIC HUB L
TIC HUB LOCK & LIMITED SLIP DIFFERENTIAL
OCK & LIMITED SLIP DIFFERENTIAL
OCK & LIMITED SLIP DIFFERENTIAL
OCK & LIMITED SLIP DIFFERENTIAL
OCK & LIMITED SLIP DIFFERENTIAL
TTTTTrrrrransf
ansf
ansf
ansf
ansfer C
er C
er C
er C
er Case and
ase and
ase and
ase and
ase and TTTTTrrrrransf
ansf
ansf
ansf
ansfer C
er C
er C
er C
er Case S
ase S
ase S
ase S
ase Selec
elec
elec
elec
electttttor E
or E
or E
or E
or Elec
lec
lec
lec
lectr
tr
tr
tr
tric S
ic S
ic S
ic S
ic Swit
wit
wit
wit
witch
ch
ch
ch
ch
(If fitted)
(If fitted)
(If fitted)
(If fitted)
(If fitted)
On four wheel drive vehicles transfer case is fitted after the
gear box for driving front live axle along with rear axle.
The following 3 selector positions are provided on the knob.
2H -
2H -
2H -
2H -
2H - Only two rear wheels are driven and transfer case
operates at 1:1 ratio.
4H -
4H -
4H -
4H -
4H - All four wheels are driven and transfer case operates
at 1:1 ratio.
4L -
4L -
4L -
4L -
4L - All four wheels are driven and transfer case operates
at 2.48:1 speed reduction ratio.
Automatic Hub Lock
4X4 Selector Switch
For driving in 2H mode keep the selector knob in 2H position.
(*For 4 WD model only)