52
COMBI-SWITCH (RH STALK):
1) Left Turn signal:
Push lever up-
ward.
2) Right Turn signal:
Push lever
downward.
3) High beam :
Push the Switch for-
ward to select the High Beam
function.
Pull the lever back to select the low
beam.
4) High beam Flash (Spring return):
To flash the high beams pull the
lever towards you from the normal
position with the spring force. This
does not require the headlamp to
be turned ON. The lever will return
to normal position when released.
5) Headlamp Rotary Switch :
A) OFF Position:
Day time running
lamps (DRL) will be
‘ON’.(if provided)
B) Parking Lamp:
Rotate to position ‘B’
to turn ‘ON’ the Park-
ing lamps.
DRL will be ‘OFF’
C) Low Beam:
Rotate to position ‘C’
to turn ‘ON’ the Low
Beam function.
DRL will be ‘OFF’
Head lamp leveling rotary switch:
Inner rotary switch on right hand stalk
is provided for head lamp leveling. With
the inner rotary switch, Head lamp
leveling can be done with head lamp
in Low Beam and in ‘ON’ position.
Depending upon the number of occu-
pants and luggage in the vehicle head-
lamp focus may change. This can be
adjusted by rotating the knob to one
of the 3 level positions.
6. Lane Change Signal:
To signal a lane change, move the
lever up or down to the point where
the indicator light begins to flash, but
the lever does not latch. The turn
signal will flash three times automati-
cally.
INSTRUMENTS & CONTROLS
COMBI-SWITCH
03
