8
9
Screen of the clock
The screen shows the current time and the number of the activated time zone.
Time correction is possible after pressing the CONFIRM button (6) and the minutes field begins
blinking. The blinking value can be altered with the buttons
“
+
”
or
“
-
”
Pressing the CHOOSE
button (7) you come to the hours field that can be set also with the buttons
“
+
”
or
“
-
”
.
Pressing the CONFIRM button (6) confirms the changes (the clock field will stop blinking).
Normally the
equals to
“
0
”
namely the parameters aren
’
t available.
After changing the level to
“
1
”
,
“
2
”
,
“
3
”
or
“
4
”
successive screens show the values of the
parameters.
The last screen contains
“
****
”
after which it comes back to the above mentioned screens.
Screen of setting the parameters
parameters level
PARAMETERS
Parameter
name
Unit
Upper and
lower thershold
of the changes
Parameter value
(change with +/-)
!
PARAMETERS ADJUST THE CONTROL UNIT TO THE PROPERTIES OF
THE FIREPLACE AND CENTRAL HEATING SYSTEM. THEIR CHANGE
OUGHT TO BE CONSULTED WITH THE FIREPLACE PRODUCER.
ILL-CONSIDERED MODIFICATIONS CAN CAUSE UNSTABLE AND
INEFFICIENT OPERATION OF THE SYSTEM
PARAMETERS LEVEL 1
No
NAME
RANGE
SETTING
FUNCTION
20 FIREPLACE
Temp.
45...85
o
C
55
o
C
Preset temperature of the fireplace kept by the control
unit
31
Switch-on Temp.
of PUMPS
30...75
o
C
45
o
C
Minimal temperature of the buffer at which
the CH pump P3 can be activated.
10
Signal
ON +
ALARM
OFF turns off sound signal
ON turns on sound signal
ON+ALARM turns on sound and alarm
11
Language
Polish/
English/
Deutsch
Polish
DEFAULT
OFF/ON
/ON+
ALARM
PARAMETERS LEVEL 2
No
NAME
RANGE
DEFAULT
SETTING
FUNCTION
70
Zone1 from
0:00...23:4
5
6:00
Start of the 1st time zone
71
Zone1 to
0:00...23:4
5
8:00
End of the 1st time zone
72
0:00...23:4
5
14:00
73
0:00...23:4
5
17:30
74
0:00...23:4
5
20:00
75
0:00...23:4
5
22:30
76
ECO4 from
0:00...23:4
5
23:00
Start of the 4th time zone - economic
77
ECO4 to
0:00...23:4
5
5:00
End of the 4th time zone - economic
78
0:00...23:4
5
8:00
Start of the 5th time zone - economic
79
0:00...23:4
5
13:30
End of the 5th time zone - economic
13
LCD backlight OFF/ON
OFF
OFF - backlight is active for 2mins from the last pressing
of the button
ON -backlight is active when the control unit
is switched on.
Turning off the backlight means it equals to <15>.next
14
Time zones
OFF
OFF
Selection of the language version
Zone2 from
Start of the 2nd time zone
Zone3 from
Start of the 3rd time zone
Zone2 to
End of the 2nd time zone
Zone3 to
End of the 3rd time zone
ECO5 from
ECO5 to
60
PumpBUF
temp.ON
-
30...75
o
C
48
o
C
Minimal temperature of the fireplace at which
the buffer pump P2 (BUF) can be activated.
15
LCD backlight
minimum
0...25%
10%
Minimal backlight level of the LCD (it
’
s vital with negative
LCD). The value 0% means a full turn-off
OFF - time zones are disabled
50
ChokeV
State OFF
0...100%
0%
Position of the choke valve in the
state
turned off (0%-full shut-off, 100% - full opening)
power supply
PARAMETERS LEVEL 3
PARAMETERS CAN BE CHANGED AT THE UNLOCKED PASSWORD
No
NAME
RANGE
DEFAULT
SETTING
FUNCTION
33
Hysteresis
of PUMPS
1...10
o
C
1
o
C
Temperature hysteresis of turning on/off the pumps CH/WAW.
The temperature difference between turning on
and turning off the pumps. It prevents from often
switchovers, especially if there's another heat source
in the heating system.
61
DeltaBUF
-10...+10
o
C
1
o
C
Minimal temperature difference between fireplace and buffer
required for the BUF pump (P2) to run. Negative values have
application for big buffers with the temperature sensor mounted in
the upper zone
CLOCK
