22
3
DM-
blower
TB-
safety sensor of the boiler
T1-
sensor of the boiler temperature
T2-
sensor of the WAW container temperature
T4/TP-
room thermostat
T6-
sensor of the flue gas temperature
P1-
circulating pump CH
P2-
pump loading the WAW container
M-
mixer drive
Fig.2A Operation without the mixing valve
3.2 Configuration with the mixer in the safety system of the return
temperature of the boiler.
!
For this configuration you set <60>(
„
ModeMIXER
”
)=RETURN
Fig.2A Operation of the controller with the 3-way mixing valve in the safety system of
the return temperature of the boiler
DM-
blower
TB-
safety sensor of the boiler
T1-
sensor of boiler temperature
T2-
sensor of the WAW container
temperature
T3-
sensor of the return temperature
T4/TP-
room thermostat
T6-
sensor of the flue gas temperature
P1-
CH circulating pump
P2-
pump loading the WAW container
P3-
pump of the mixer
M-
drive of the mixer
CE CONFORMITY DECLARATION
Ref. No. 58.RT.01.2007/1/B
We,
ZAK
Ł
AD ELEKTRONICZNY TATAREK Jerzy Tatarek
75 Swieradowska St. , 50-559 Wroclaw
declare under our sole responsibility that
the product: Controller of the Heating System
model: RT-14
PN-EN 55022: 2011 -
(EMC)- IT devices
Characteristics of radioelectric noises. Acceptable levels and
measurement methods
Place of issue:
Manufacturer representative:
Wroclaw
Miros
ł
aw Zas
ę
pa
Date of issue:
Position:
17.09.2012
Electronic designer
is in conformity with the basic requirements included in Directive EMC 2004/108/WE of 15.12.2004 (the
electromagnetic compatibility law of 13.04.07) and Directive LVD 2006/95/WE of 21.08.07 (Laws
Journal of 2007 No. 155 pos. 1098) regarding the requirements for electric devices.
To the conformity evaluation the following harmonized standards were used:
PN-EN 60730-2-1: 2002 -
Automatic electric regulators for house usage and the like. Part 2-1:
Specific requirements regarding electric regulators for electric house
devices
PN-EN 60730-1: 2012 -
Automatic electric regulators for house usage and the like.
Part 1: General requirements.
Electromagnetic compatibility
Electronic Engineering Plant TATAREK
has initiated management system and complies with the following standard :
ISO9001: 2000 CERTIFICATE No. 133/2004 of 01.2004
Polish Foreign Trade Chamber
The last two digits of the year in which the CE marking was affixed: 12
