VERTICAL TOWED MIXER - TWO AUGERS
MV-30D SERIES
MAIN PARTS OF THE MIXERS
The mixing system is of vertical type, consisting of two conical augers arranged inside a
frusto-conical tub, open at the top.
The tub has several retainers (manually driven) that allow controlling the degree of
chopping of the products mixing.
The principle of mixing is based on the movement of the product, by means of the
auger, which when rotating, raises the components of the mixture to the top, and by
gravity descends through the sides of the tub towards the bottom of the propeller
(Fountain or volcano movement).
To load the mixer, with silage or bulk products, you must use the adequate machinery
depending to the type of ingredient.
The mixers are equipped with an electronic scale that allows to control the quantity of
every ingredient of the ration determined by the nutritionist. This allows that all the
animals eat the same every day.
Mixers designed by TATOMA, are built simple and with highly resistant steel, the
mechanisms have little wear and require little maintenance.
The figures on the following pages show the main parts of the different types of towed
vertical mixers.
The main parts that make up the different mixer models are described below:
Mixing
system:
Built in high resistance materials, capable of working continuously,
for several years. In general, the design of these elements has been
made taking into account that those parts subject to wear, are
easy to repair or interchangeable.
It consists of the following elements:
Tub:
It is made up of a bottom of sufficient thickness to absorb the
stresses and wear of mixing, and frusto-conical sides to guarantee
the correct circulation of the components during mixing.
Made up of a conical endless propeller arranged vertically in the
center of the tub. The auger is powered by the PTO of the tractor,
which through a PTO transmission and a 2-speed gearbox, drives
two epicyclic redactor engines that transmit the turn to the augers,
or propellers. To cut the product, each auger is equipped with
treated and tempered blades. Because they are subject to wear,
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
Auger:
- 28 -
