TATSUMAKI
-
1375 Egbert Ave., San Francisco, CA 94124
Tel: 1-888-725-0989 Fax: 415-671-0839
E-mail: info@gotatsumaki.com | Website: www.GoTatsumaki.com
5. Determine the proper location for the Power Supply Cord by making sure it:
A) allows the field wiring compartment or socket outlet to be hidden by the Lower
Chimney cover .
B) does not have the ductwork blocking your access to the field wiring compart-
ment or socket outlet.
6. After fixing the range hood to the wall, fix the exhaust pipe (use 6” round rigid steel
pipe is highly recommended, DO NOT use semi-rigid or flexible hose). Sealed with
duct tape, NO screws.
7. Install the dampers carefully if necessary. Install dampers only when you are using
the common vent at apartment, or City inspection. Generally we recommend not to
install dampers, instead to install roof cap with damper preferred.
8. Put the Upper Chimney inside the Lower Chimney and install it on the range hood.
Slide up the Upper Chimney to the desirable height.
9. Adjust Upper Chimney to the desirable height, then install the plate as shown in the
below picture.
10. Drill two holes on the wall to accommodate the plates and attach the Upper Chim-
ney to the wall with screws provided. (See below picture)
