39
List of Standard Seed Plates in the Planter
Plate for CORN ................... 28 -Cell
Ø 13.5 mm 4.5 mm - 0502020519
Plate for CORN ................... 28-Oblong Cell
15 x 10 mm 4.5 mm - 0502020518
Plate for SOYBEANS ............ 90-Cell
Ø 9 mm
5.5 mm - 0502020565
Plate for SOYBEANS ............ 100-Cell
Ø 7 mm
5.5 mm - 0502020564
LIST OF OPTIONAL SEED PLATES - SEE THE PAGE 62.
Attention: THE AMOUNT OF PLATES FOR CORN, SUPPLIED IN EACH MACHINE, IS IN
RELATION TO THE NUMBER OF ROW UNITS AND POSSIBLE SPACING.
Note:
THE AVAILABLE HEIGHT FOR THE PLACEMENT
OF THE PLATE PLUS THE FALSE RING IS 8.5 MM.
THE THICKNESS OF THE FALSE RING SHOULD
ALWAYS COMPLETE 8.5 MM HEIGHT.
- USING PLATES OF 4.5 MM THICKNESS, THE FALSE
RING SHOULD BE OF 4.0 MM.
- USING PLATES OF 5.5 MM THICKNESS, THE FALSE
RING SHOULD BE OF 3.0 MM.
- USING PLATES OF 8.5 MM THICKNESS, DON'T
USE ANY FALSE RING.
Use of Powdered Graphite
The powdered graphite should be mixed to the seeds to facilitate the distribution
and to increase the mechanism distributor useful life.
AMOUNT OF GRAPHITE PER KILOGRAM OF SEED
Kind of Seed-metering system:
Seeds with chemical treatment
Round and
Bigger
Round and
Smaller
Flattened
Seed Plate
04 grams
02 grams
04 grams
- The graphite should not be mixed before the chemical treatment of the seeds.
- The graphite should not be mixed to the insecticide for application in the seeds.
- For non treated seeds, just use the half of the graphite mentioned in the previous
table.
SET
SET
SET
SET
SET-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
Note: - THE SEED METERING POSSESSES CUTOFF PAWL AND KNOCKER THAT SHOULD
BE CLEANED AT LEAST ONCE A DAY FOR NON TREATED SEEDS; AND TWICE A
DAY FOR PLANTING WITH TREATED SEEDS.
