24
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
PST PLUS
Working preparation
Procedures before operating the planter
The following instructions must be carefully observed in order to get the best working
performance and to extend the planter lifetime. When putting the planter in operation for
the first time during off season or after a long inactive period, follow the instructions below:
1
)
Move and lock the lever (A) to release the chain tightener.
2
)
Displace the chain from the sprockets.
NOTE
Always turn the driven shaft to the clockwise direction.
A
3
)
Using a 19 mm wrench (3/4"), turn the driven shaft applying a small effort and check
if the shaft will turn easily.
Place the chain in the sprockets again. Release the lever by loosening the chain
tightener pin.