111
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
8. Maintenance
Using the lock for maintenance
The lock (A) is used on the front loaders to assure that the operator works safely when
carrying out any maintenance to avoid that the moving support falls over the operator.
The operator must lift the moving support (B) up to a point that is possible to place the
lock (A) and after this process the equipment is free to work without the risk of accidents.
B
A
- Only
QUALIFIED, CAPABLE
and
AUTHORIZED
personnel must carry out the
maintenance of the equipment.
- Every maintenance must follow the recommendations that are included on the NR-12
(July/19 version) on the chapter 'maintenance, inspection, preparation, adjustment
and repairs' (from item 12.11.1 to 12.11.5).
- Observe every safety condition and use safety glasses, foot protection, earplugs/
muffs, protective gloves and any other required PPE.
- Remove the ignition key before carrying out any type of maintenance on the equipment.
ATTENTION! RISK OF ACCIDENT
