70
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
Hose connection system:
The BT system with control valve uses the tractor pump, thus changing the way that it
feeds the control valve, using the pressure and return hoses.
The control valve will start to have pressure and return hoses.
1. Read the tractor manual to learn about the pressure and return hoses connection
to the tractor.
Setting up a BT tractor with control valve
BT complete system with control valve assembly
The PCA assembly to the tractor must be done by a qualified person that works on
the factory or on a reseller.
1. First of all, put all parts on a clean and easy-to-identify place.
2. Check the amounts on the list that can be found inside the box.
- For some tractor models, control valves with pressure passage will be used; for
other models, use a conventional control valve.
NOTE
2. Uncouple the pressure duct (A) on the intersection (B), which connects the tractor
pump (C) outputs to the rear control valve fixation (D) to leave the outputs opened.
D
D
A
A
B
B
C
C
5. Assembly
