75
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
BT complete system without control valve assembly
Setting up the BT tractor without control valve
Setting up the hydraulic circuit for the BT models
1. Carry out a maintenance on the hydraulic circuit as stated on the tractor manual.
2. Never mix different brands of oil.
5. Assembly
The PCA assembly to the tractor must be done by a qualified person that works on
the factory or on a reseller.
1. First of all, put all parts on a clean and easy-to-identify place.
2. Check the amounts on the list that can be found inside the box.
1. Remove the front counterweights as shown on the counterweights page.
2. Fasten the plates to the tractor axles as shown on the 'plate fixation' page.
3. Assemble the right and left frames on the rear plate holes and on the tractor side,
as stated on the 'frame assembly' page.
4. Assemble the rod according to the instructions on the 'rod assembly' page.
- The itens and the assembly may change due to the tractor brand and model.
NOTE
