80
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
Unhitching from the tractor
1. Choose a place as flat as possible and position the moving support (A) using the
jacks (B).
2. Remove the cotter pin that locks the moving support fixation pin (C) and pull it using
your hand to remove it.
- At this moment, it is necessary to slightly activate the control valve lever to facilitate
the unhitching.
NOTE
- Never mix different brands of oil.
- Never pour oil above the level.
NOTE
3. Shut down the engine and activate the lever a couple of times to remove the oil
pressure from the system.
4. Unhitch the quick couplers and place the protection caps on them.
5. Remove the tractor on a slow gear and leave the pins and cotter pins on their place
to avoid losing them.
A
A
C
C
B
B
5. Assembly
