BRINK Series - English
11
10.0 PROJECTING PIN EXTENSION
Where the conical shaft height should be not suffi cente for the application, Is available
an extension shaft (optional) to increase this height.
For available heights refer to paragraph 7.0
First of all deconnect the arm from the conical connection by unscrew the two head
screws.
Set the extension shaft in the conical connection like in fi gure.
Remember to keep the main screw inside conical connection.
Fix the extension shaft on the conical connection by two screw supplied with the
extension.
MECHANICAL
SECTION
Set the arm on the extension and fi x to it by the two original screws.
About arm connection and arm removal refer to previous paragraphs.
