tau LUXE6KIT, Use And Maintenance Manual

19

ment. The items must be stored upright, even for short periods, respecting the direction that is indicate on the packaging and taking into consid

-

eration that high centres of gravity cause instability.  

The bar must be stored making sure that there are no protruding parts or loads that could damage it. Once unpacked, make sure that it is intact. 

Do not discard the packaging, but rather recycle it following local laws. 

WARNING: to prevent suffocation or similar dangers, do not allow children to handle the packaging.

  10. GUARANTEE: GENERAL CONDITIONS

TAU guarantees this product for a period of 24 months from the date of purchase (as proved by the sales document, receipt or invoice).

This guarantee covers the repair or replacement at TAU’s expense (ex-works TAU: packing and transport at the customer’s expense) of parts that 

TAU recognises as being faulty as regards workmanship or materials.

For visits to the customer’s facilities, also during the guarantee period, a “Call-out fee” will be charged for travelling expenses and labour costs.

The guarantee does not cover the following cases:

•  If the fault was caused  by an installation that was not performed according to the instructions provided by the company inside the product pack.

•  If original TAU spare parts were not used to install the product.

•  If the damage was caused by an Act of God, tampering, overvoltage, incorrect power supply, improper repairs, incorrect installation, or 

other reasons that do not depend on TAU.

•  If a specialised maintenance man does not carry out routine maintenance operations according to the instructions provided by the com

-

pany inside the product pack.

•  Wear of components.

The repair or replacement of pieces under guarantee does not extend the guarantee period.

In case of industrial, professional or similar use, this warranty is valid for 12 months.

MANUFACTURER’S DECLARATION OF INCORPORATION

(in accordance with European Directive 2006/42/EC App. II.B)

Manufacturer:  

TAU S.r.l.

Address:  

Via E. Fermi, 43 - 36066 Sandrigo (Vi) - ITALY

Declares

 under its sole responsibility, that the product: 

Electromechanical actuator

designed for automatic movement of: 

Road Barriers

for use in a: 

General environment

complete with: 

Electronic control unit and radioreceiver

Model: 

LUXE

Type:

LUXE - LUXE/I

Serial number: 

SEE SILVER LABEL

Commercial name: 

AUTOMATIC BARRIER

Has been produced for incorporation on an access point (

automatic barrier

) of for assembly with other devices used to move such an access point, to 

constitute a machine in accordance with the Machinery Directive 2006/42/EC.

Also declares

 that this product complies with the essential safety requirements of the following EEC directives:

-   2014/35/EU Low Voltage Directive  

-  

2014/30/EU Electromagnetic Compatibility Directive

and, where required, with the Directive: 

-  

2014/53/EU Radio equipment and telecommunications terminal equipment

Also declares that 

it is not permitted to start up the machine

 until the machine in which it is incorporated or of which it will be a component has been 

identified with the relative declaration of conformity with the provisions of Directive 2006/42/EC.

The following standards and technical specifications are applied:EN 61000-6-2; EN 61000-6-3; EN 60335-1; ETSI EN 301 489-1 V1.9.2; 

ETSI EN 301 489-3 V1.6.1; EN 300 220-2 V2.4.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103.

The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all information pertinent to the quasi-machinery.

Sandrigo, 12/09/2017 

Legal Representative

_________________________________________

Loris Virgilio Danieli

Name and address of person authorised to draw up all pertinent technical documentation:

Loris Virgilio Danieli - via E. Fermi, 43 - 3606 Sandrigo (Vi) Italia

ENGLISH