[Technical Documentation]
When the selector is in the OFF position the resistances are not receiving current
independently of what is indicated by the temperature control.
Take into consideration that as the calendar contains hot oil, the fact of putting the
selector in the OFF position does not mean instant cooling of the calendar
(THERMAL INERTIA)
Machine must be running to heat.
5. - Pressure selector ON/OFF: By means of this selector the pneumatic cylinder
is activated that raises the pressure roller, in such a way that it comes into contact
with the calendar.
If the selector is turned to the OFF position the roller descends and separates from
the calendar.
The pressure roller must not stay in contact with the calendar for prolonged periods
if the machine is not operating because the silicone roller may become deformed.
6. - Maintenance run: By keeping pressed this button, the machine will run. This
is useful for maintenance tasks as cleaning the calendar.
7. - Holding roller selector ON/OFF:
When this is in the ON position, the wheels of the support come into contact with
the roller below them and hold the laminated sheets
8. - Separating roll ON/OFF:
It activates the micro-perforating well and the separating roll.
9. - Pump ON/OFF: By pressing this key the vacuum/blowing pump, wil activated
or deactivated.
10. - Speed Control:
By pressing button “+” it increases the speed
By pressing button “-” it reduces the speed
11. - Sheet size control: By pressing on the format value you can modify the
length of the sheet (in mm).
12. - Feeder key: By pressing this key, the user will go to feeder screen.
13. - Right arrow key: By pressing this key, the user will go to output screen.
14. - Left arrow key: Let the user to go to control screen.
15. – TAULER GoOn
