[Technical Documentation]
SPEED
REGULATION
The working speed of the machine is totally controllable by the operator.
This parameter depends directly on the size of the sheets as well as the
pressure and temperature at which we are working. It depends as well on
operator’s ability to feed the machine.
To modify the speed, you can use the speed control.
By pressing button “+” it increases the speed.
By pressing button “-” it reduces the speed.
PRESSURE
REGULATION
The pressure with which the nip roller (located just below the calendar roller)
presses on the latter is an essential parameter for obtaining a good quality
gloss and adhesion.
As a reference value we can indicate >2 bar <4 bar of pneumatic pressure.
This is the pressure at which most laminating machines operate. ALWAYS
OPERATE AT THE MINIMUM POSSIBLE PRESSURE.
This parameter is controlled by means of the pressure regulator located on the
principal module.
Pressure regulators