ce (fig. 1).
- To put the protective covers on
the appliance, slide them on
until a click is heard.
- Do not take the protective
covers off or put them on the
appliance if it is in operation or
is still hot.
- Section off a strand of hair
with a maximum thickness of
5cm. Position it on plates at a
distance of 10-15 cm from the
head.
- Roll the strand of hair around
the hair straightener, holding it
by the end (Fig. 2)
- Twist the appliance 360º to the
inside of the strand (Fig. 3)
- Hold plates tight by pressing
the handle together and
slide the strand from the head
towards the ends of the hair
(Fig. 4)
LOCKING BUTTON
- The appliance has a lock but-
ton for the plates so that they
can be easily stored.
- To lock the hair straighteners,
put the plates in position
and press the lock button up
towards the plates. To unlock
the plates, move the lock
button in the opposite direction
(Fig.5).
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
- Turn the appliance off, using
the on/off switch.
- Unplug the appliance to the
mains.
CLEANING
- Disconnect the appliance from
the mains and let it cool before
undertaking any cleaning task.
- Clean the equipment with a
damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or pro-
ducts with an acid or base pH
such as bleach, or abrasive
products, for cleaning the
appliance.
- Do not submerge the appliance
in water or any other liquid, or
place it under a running tap.
- If the appliance is not in good
condition of cleanliness, its
surface may degrade and
inexorably affect the duration
of the appliance’s useful life
and could become unsafe to
use.
ANOMALIES AND
REPAIR
- Take the appliance to an
authorised technical support
service if problems arise. Do
Summary of Contents for 901178000
