English
Crepe maker
S164
DESCRIPTION
A Baking plate
B S/S housing
C Power indicator (Red)
D Ready indicator (Green)
E Temperature Knob
F Spatula
G Batter spreader
H Cable compartment
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Fully extend the appliance’s power cable before
each use.
- Do not move the appliance while in use.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Do not cover the cooking surface or food with
aluminium foil and other similar materials.
- Do not cover or wrap the food with aluminium
foil and other similar materials.
- To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not store the appliance if it is still hot.
- Do not store or transport the appliance if it is
still hot.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the appli-
ance is switched off permanently.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product’s packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the appli-
ance is used a light smoke may be detected.
After a short time, this smoke will disappear.
- To eliminate the smell given off by the appliance
when used for the first time, it is recommend-
ed to have it on at full power for 2 hours in a
well-ventilated room.
- Prepare the appliance according to the function
you wish to use:
USE:
- Extend the cable completely before plugging it
in.
- Connect the appliance to the mains.
- For the first use it is better to apply some oil or
grease to the plate.
- Turn the thermostat control to the desired tem-
perature position.
- The pilot light (D) comes on.
- During the appliance’s use the pilot light (D) will
come on and off automatically, indicating the
heating elements are working, and therefore
maintaining the desired temperature.
- In order to minimize the generation of acrilamida
during the cooking process, avoid to reach dark
brown colours on the foodstuffs.
- When the food is to your taste, remove it from
the appliance with the help of a wooden spatula
or similar heat resistant implement, do not
use utensils that could damage the non-stick
coating.
ONCE YOU HAVE FINISHED USING THE APPLI-
ANCE:
- Select the minimum position (MIN) using the
thermostat control.
- Unplug the appliance from the mains.
- Put the cable back in the cable housing.
- Clean the appliance.
CABLE COMPARTMENT
- This appliance has a cable compartment situat-
ed on its underside. (Fig.1).
Summary of Contents for 968382
Page 2: ......
Page 3: ...A B C F D E H Fig 1 G ...