background image

Dear customer,

Thank you for choosing to purchase a Taurus brand 
product. Thanks to its technology, design and opera-
tion and the fact that it exceeds the strictest quality 
standards, a fully satisfactory use and long product life 
can be assured.

1. Parts description

1. Silicon stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. Viewing window
7. Back front cover
8. Control panel
9. Water tray
10. Evaporation
11. Ice shovel
12. Ice basket

2. Safety advice and warnings!

Read these instructions carefully before switching on 
the appliance and keep them for future reference. Fail-
ure to follow and observe these instructions could lead 
to an accident. Clean all the parts of the product that 
will be in contact with food, as indicated in the cleaning 
section, before use.

2.1. Keep the working area clean and well lit. Cluttered 
and dark areas invite accidents.
2.2. Do not place the appliance on hot surfaces, such 
as cooking plates, gas burners, ovens or similar appli-
ances.
2.3. The appliance must be used and placed on a flat, 
stable surface.

2.4. Do not use the appliance if the cable or plug is 
damaged.
2.5. Ensure that the voltage indicated on the rating 
label matches the mains voltage before plugging in the 
appliance.
2.6. The appliance’s plug must fit into the mains socket 
properly. Do not alter the plug. Do not use plug adap-
tors.
2.7. Do not use or store the appliance outdoors.
2.8. If any of the appliance casings breaks, immediate-
ly disconnect the appliance from the mains to prevent 
the possibility of an electric shock.
2.9. Do not use the appliance if it has fallen on the 
floor, if there are visible signs of damage or if it has a 
leak.
2.10. Do not use the appliance with damp hands or 
feet, or when barefooted.
2.11. Never use the power cord to lift up, carry or 
unplug the appliance.
2.12. Ensure that the electric cable does not get 
trapped or tangled.
2.13. Check the condition of the electrical connection 
cable. Damaged or tangled cables increase the risk of 
electric shock.
2.14. Do not touch the plug with wet hands.
2.15. Fully unroll the appliance’s power cable before 
each use.
2.16. Do not switch the appliance on without water.
2.17. Do not use the appliance if the on/off switch does 
not work.
2.18. Do not move the appliance while in use.
2.19. Disconnect the appliance from the mains when 
not in use and before undertaking any cleaning task.
2.20. Respect the MAX and MIN levels
2.21. This appliance is only for domestic use, not for 
industrial or professional use. It is not intended to be 
used by guests in hospitality environments such as 
bed and breakfast, hotels, motels, and other types of 
residential environments, even in farm houses, areas 
of the kitchen staff in shops, offices and other work 
environments. This appliance is not intended for use 
by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience 
and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by 
a person responsible for their safety. Children should 
be supervised to ensure that they do not play with the 
appliance.
2.22. Only use water with the appliance.
2.23. The use of bottled mineral water adapted for hu-
man consumption is recommended.
2.24. Never leave the appliance connected and unat-

997150_IM.indd   2

2018/01/15   11:14:01 AM

Summary of Contents for 997150



























Reviews: