Taurus ALPATEC NEW BABEL DIGITAL, Manual

English

TOWER FAN

NEW BABEL  

DESCRIPTION

Control panel

1 2-hour timer off

2 Speed setting

Low Speed

Medium Speed

High Speed

Low speed +Oscillation. 

Medium speed +Oscillation. 

High speed +Oscillation. 

USE AND CARE:

 -Fully extend the appliance's power cable befo-

re each use.

 -Do not use the appliance if its accessories are 

not properly fitted.

 -Do not use the appliance if the accessories 

attached to it are defective. Replace them 

immediately.

 -Do not use the appliance if the on/off switch 

does not work.

 -Do not remove the support feet of the applian-

ce.

 -Do not move the appliance while in use.
 -Use the appliance handle/s, to catch it or move 

it.

 -Do not use the appliance if it is tipped up and 

do not turn it over.

 -Do not turn the appliance over while it is in use 

or connected to the mains.

 -mains when not in use and before undertaking 

any cleaning task.

 -Store this appliance out of reach of children 

and/or persons with physical, sensory or 

reduced mental or lack of experience and 

knowledge.

 -Keep the appliance in a dry, dust-free place, 

out of direct sunlight.

 -Make sure that dust, dirt or other foreign ob-

jects do not block the fan grill on the appliance.

 -Keep the appliance in good condition. Check 

that the moving parts are not misaligned or 

jammed and make sure there are no broken 

parts or anomalies that may prevent the appli-

ance from operating correctly.

 -Never leave the appliance connected and un-

attended if is not in use. This saves energy and 

prolongs the life of the appliance.

 -Do not use the appliance to dry pets or an-

imals.

 -Do not use the appliance to dry textiles of any 

kind.

INSTALLATION

 -Ensure that the fan is switched off from the 

supply mains before start any installation or 

assembly operation.

 -Do not remove the support feet of the applian-

ce.

 -Ensure that the appliance is level with respect 

to the floor.

 -Do not cover or obstruct any of the openings of 

the appliance.

 -The plug must be easily accessible so it can be 

disconnected in an emergency.

 -The appliance should be used with its base 

fitted.

 -The appliance should be used with its base 

feet fitted.

ASSEMBLING THE BASE:

 -Fit the base with the column and secure it with 

the screws provided (Fig.1). 

 -To fix the base into the appliance, place the 

appliance face down.

 -Fit the base on the main body of the appliance.
 -Fix the base using the screws provided 
 -Stand the appliance up again so as to check 

that the base works properly. 

INSTRUCTIONS FOR USE

BEFORE USE:

 -Make sure that all products’ packaging has 

been removed.

 -Prepare the appliance according to the function 

you wish to use: