showers or swimming pools.
-Do not use the appliance with damp hands or
feet, or when barefooted.
-Never use the electric wire to lift up, carry or
unplug the appliance.
-Ensure that the electric cable does not get
trapped or tangled.
-Check the condition of the electrical connection
cable. Damaged or tangled cables increase the
risk of electric shock.
-This appliance is not suitable for outdoor use.
-The power cord must be regularly examined for
signs of damage and if damaged, the appliance
must not be used.
-As an additional protection to the electrical
supply for the appliance, it is advisable to have
a differential current device with a maximum
sensitivity of 30mA. Ask for advice from a com-
petent installer.
-Do not use or store the appliance outdoors.
-Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
-Do not touch the plug with wet hands.
-Do not touch any of the appliance’s moving
parts while it is operating.
USE AND CARE:
-Fully unroll the appliance’s power cable before
each use.
-Do not use the appliance if the on/off switch
does not work.
-Use the appliance handle/s, to catch it or move
it.
-Do not use the appliance if it is tipped up and do
not turn it over.
-Do not turn the appliance over while it is in use
or connected to the mains.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-This appliance is for household use only, not
professional or industrial use.
-This appliance should be stored out of reach of
children and/or the disabled.
-Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
-Keep the appliance in good condition. Check
that the moving parts are not misaligned or loc-
ked and make sure there are no broken parts or
anomalies that may prevent the appliance from
operating correctly.
-Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE:
-Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer’s liability null and void.
INSTALLATION
-Be sure to remove all packaging material from
inside the appliance.
ASSEMBLING THE BASE:
-To fix the base into the appliance, place the
appliance face down.
-Fit the base on the main body of the appliance.
-Fix the base using the nut provided
-Stand the appliance up again so as to check
that the base works properly.
ASSEMBLING BASE FEET: (ONLY FOR STAN-
DING POLE MODELS)
-The appliance has some base feet on which
the product can be supported.
-To assemble the base feet, place the appliance
face down.
-Fit the base on the main body of the appliance.
-Position the base feet on the body of the
appliance using the screws (provided with the
appliance) (Fig 1)
-Stand the appliance up again so as to check
that the base feet work properly.
ASSEMBLING THE GRILL AND THE PROPE-
LLER:
-Position the back part of the grill (E) in front of
the body of the motor (G), so that they both fit
together.
-Screw the nut that fixes the grill in place (D),
making sure it fits together correctly.
-Position the fan propeller (E) on the motor shaft
(F).
-Screw down the screw that holds the propeller
in place (B), making sure it is held in position
correctly.
-Position the front grill (A) against the back grill
(E), making sure the safety screw fits together.
Fix the grill with the hooks and screw the safety
screw (K) by using a screwdriver.
-Check that the propeller turns correctly.
