CORDLESS JIGSAW
BT-JS 18 Li
QUICK START
GUIDE
Easy steps to getting started.
1. Carefully remove all items from the packaging, take care that you have all parts supplied in the
packaging before discarding.
2. To mount the battery pack (5) , push the battery pack (5) onto the equipment until it latches in place.
3. To remove the battery pack (5), press the pushlock button (1) to remove the battery pack (5) from the equipment.
4. To charge the battery pack (5), follow the instruction on page 1 of the Quick Start Guide.
5. To assemble the parallel stop (11), loosen the locking screw (13) on the soleplate (7). Slide the parallel stop (11) into
the guide on the soleplate (7). You can fit the parallel stop (11) on either the left or right of the equipment. The
guide strip must always face downwards. Set the required distance using the measurement scale on the parallel stop
(11) and retighten the locking screw (13).
6. To adjust the mitre setting, use the Allen key (4) to loosen the screws for the soleplate on the bottom of the adjustable
soleplate (7). Pull the soleplate (7) slightly forward and move the soleplate (7) into the required position (maximum
45° to the left and right) and refasten the screw securing the soleplate.
7. To connect the jigsaw to a vacuum cleaner, use the adaptor for dust extraction (6). Attach the adaptor (6) in a way that
it is securely seated in the housing. Fit the vacuum tube of the vacuum cleaner onto the adaptor opening (6). Check that
the connections are airtight.
8. To switch on the saw, press the locking button (2) and the ON/OFF switch (3) at the same time. Note: Allow the saw
blade (12) to accelerate until it reaches full speed. Then slowly move the saw blade along the cutting line. Only
exert gentle pressure on the saw blade as you do so.
9. To switch off the saw, release the locking button (2) and the ON/OFF switch
(3).
Important!
Do not put down the machine until the saw blade has
reached a complete standstill.
10. To set the pendulum action, adjust the selector switch for pendulum action (8)
to the required setting. For more detail, refer to section 6.6.2 of the User Guide.
11. The laser (16) switches on automatically when the On/Off switch (3) is pressed.
12. For more details on how to perform cuts, refer to Section 6.6.5, 6.6.6 and 6.6.7
of the User Guide.
13. To change the saw blade (12), refer to Section 6.5.3 of the User Guide.
14.
IF IN DOUBT PLEASE REFER TO THE USER GUIDE PROVIDED.
2 3
1
5
6
4
7
11
8
12
13
16
4
Summary of Contents for BT-CK 18 2B-1.5 Kit
Page 8: ...7 ...
