Taurus FOODIE, Manual

USE

BEFORE USE:

 -Make sure that all the product’s packaging 

material has been removed.

 -Before using the product for the first time, clean 

the parts that will come into contact with food in 

the manner described in the cleaning section.

 -Prepare the appliance according to the function 

you wish to use.

ASSEMBLING THE 

APPLIANCE

JUG LID (B):

 -The lid is used to close the jar and activate the 

safety sensors in order to start the appliance. 

 -The hole in the lid is used to introduce food, the 

spatula to stir the food, and as a holder for the 

measuring beaker.

 -The silicone seal (C) prevents liquids from 

escaping between the jar and the lid. Fit the 

silicone seal in place, checking that it is seated 

correctly. (Fig. 1)

 -When fitting the silicone seal, make sure that 

the thin side is in contact with the lid. 

 -IMPORTANT: Never use the lid if the seal is not 

fitted correctly. 

 -IMPORTANT: Never open the jug lid while the 

appliance is in operation, as there is a danger 

of the contents escaping and/or burns. Before 

opening the jug lid, stop the appliance and wait 

until the blades come to a standstill. 

BLADES (D):

 -The blade seal (E) prevents liquids from see-

ping out and damaging the appliance. It must 

be fitted to the blade before fitting the blades 

inside the jug. 

 -Place the blade seal at the bottom of the blade. 

Insert the blade in through the hole on the bot-

tom of the jug so that it fits correctly. (Fig. 2)

 -Use one hand to hold the top of the blade and 

the other hand to grip the tensioner (G). Fit the 

tensioner on the bottom of the blade and turn it 

clockwise. (Fig.3).

 -To remove the blades, turn the tensioner 

anti-clockwise. Hold the blade by the top and 

carefully pull it upward. (Fig. 4) 

JUG (F):

 -The jug has a maximum capacity of 2 litres. 
 -CAUTION: The surface of the jug may reach 

very high temperatures during operation. 

Do not touch the jug with bare hands during 

operation.

 -To attach the jug, first put the lid on it and turn 

the lid clockwise until it clicks into place. (Fig. 

5). 

 -Now place the jug onto the appliance’s base 

unit. The bottom mark on the jug has to align 

with the mark on the central unit (Fig. 6). You 

will hear a click when the container is fitted 

correctly to the base of the appliance. 

 -Finally, place the measuring beaker in the lid. 
 -To take the jug off the central unit, press the 

release buttons on the bottom of the both side 

handles and remove the container. (Fig. 7)

 -IMPORTANT: for safety purposes, the applian-

ce stops when the lid is opened. 

CONTROL PANEL (K):

TEMPERATURE SETTING (2):

 -Pressing this button activates the temperature 

selection function (30-120 °C). 

 -The temperature indicator (1) will flash. To 

select the temperature, turn the selector knob 

(10). 

 -NOTE: the appliance will only start heating 

after the time and speed have been program-

med. The Pulse function will remain inactive in 

this case. 

SPEED SETTING (3):

 -Pressing this button activates the speed selec-

tion function (1-12). 

 -The speed indicator (1) will flash. To select 

the speed, turn the selector knob (10) to the 

desired speed. 

TIME SETTING (4):

 -Pressing this button activates the time selec-

tion function (from 5 seconds to 90 minutes). 

 -NOTE: if no operating time is selected, the 

appliance will switch off automatically after 90 

minutes. 

SCALES FUNCTION (4):

 -The maximum weight is 5000 g. The weight 

range is 5-5000 g.