Important!
When using equipment, a few safety
precautions must be observed to avoid injuries
and damage. Please read the complete
operating manual with due care. Keep this
manual in a safe place, so that the information
is available at all times. If you give the
equipment to any other person, give them
these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.
1. Safety regulations:
The corresponding safety information can be found
in the enclosed booklet.
CAUTION
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
1.
Keep your work area tidy.
Untidiness in the
workplace can lead to risk of accidents.
2.
Take into account influences from the
surrounding environment.
Do not expose
electrical appliances to rain. Do not use
electric tools in damp or wet environments.
Provide good lighting. Do not use electric
tools near flammable liquids or gases.
3.
Protect against electric shock.
Avoid bodily
contact with earthed parts, for example
pipes, heaters, ovens and fridges.
4.
Keep other people away!
Do not let other
people gain access to the tool or cable,
keep them away from your workplace.
5.
Store the equipment safely and securely.
Unused equipment must be stored in a dry,
locked room, out of the reach of children.
6.
Do not overburden the tool.
It will work
better and safer when used within its quoted
capacity range.
7.
Use the correct tool.
Do not use weak tools
or attachments for heavy duty work. Never
use the electric tool for purposes other than
that for which it is designed, for example
do not use the hand-held circular saw to fell
trees or cut branches.
8.
Wear suitable work clothes.
Do not wear
loose clothing or jewellery. It could get
caught in moving parts. Rubber gloves and
non-slip shoes are recommended when
working outdoors. If you have long hair,
wear a hair-net.
9.
Wear safety goggles.
Use a dust mask when
working on dusty jobs.
10. Do not use the cable for purposes other
than that for which it is designed.
Do not
carry the tool by the cable and do not use
it to pull the plug out of the socket. Do not
carry the charger by the cable and do not
use is to pull the plug out of the socket.
11.
Secure the workpiece.
Use clamps or a
vice to hold the workpiece securely. This is
safer than using your hand, and also makes
it possible to use the machine with both
hands.
12. Take care that your feet are a stable
distance apart.
Avoid abnormal working
postures. Make sure you stand squarely and
keep your balance at all times.
13. Take good care of your tools.
Keep
your tools sharp and clean to keep them
working safely and efficiently. Observe the
maintenance instructions and the notes
about changing tools. Check the plug and
cable regularly, and if they are damaged,
have them replaced by a certified expert.
Check extension leads regularly andreplace
these if damaged. Keep handles dry, clean
and free from oil and grease.
14. Pull the power plug.
When not in use, before
maintenance work or when changing tools,
such as saw blade, drill and machine tools of
any kind.
7
After Sales Support TEL: 1300 922 271 EMAIL: service.australia@einhell.com
“Caution - Read the operating
instructions to reduce the risk of inquiry”
Wear ear-muffs.
The impact of noise can cause damage
to hearing.
Wear a breathing mask.
Dust which is injurious to health can be
generated when working on wood and
other materials.
Never use the device to work on any
materials containing asbestos!
Wear safety goggles.
Sparks generated during working or
splinters, chips and dust emitted by the
device can cause
loss of sight.
To avoid damaging the gearbox, the
drill / hammer drill selector switch should
only be movedwhen the machine is at a
standstill.
Change the gear only when the drill is
at a standstill. If you fail to observe this
point, the gearing may be damaged.
