Taurus LIQUAJUICE LS-651 BM, Manual

English

Juicer

Liquajuice LS-651 BM

DESCRIPTION

A Pusher

B Feeding tube

C Juice auger

D1 Filter

D2 Spinning Brush

E Juicer bowl

F Base

G Residue exit

H Juice exit

I Jugs (one to collect residue and one to collect 

juice)

J On/Off /Reverse button (3 positions)

K Reverse function

L Juice tap
M Rubber Stopper 

USE AND CARE:

 -Fully unroll the appliance’s power cable before 

each use.

 -Do not use the appliance if the parts are not 

properly fitted.

 -Do not use the appliance if the switch does not 

work.

 -Do not move the appliance while in use.
 -Store this appliance out of the reach of children 

and/or those with reduced physical, sensory or 

mental abilities or those unfamiliar with its use

 -To push the food, always use the food pusher. 

Never use your fingers or other accessories.

 -Never leave the appliance connected and unat-

tended if is not in use. This saves energy and 

prolongs the life of the appliance.

 -Do not use the appliance for more than 30 

minutes at a time. In case of operate in cycles, 

allow the appliance a resting period of at least 

15 minutes between each cycle. Under no cir-

cumstances should the appliance be operated 

for more time than necessary.

 -Do not use the appliance with frozen goods, ice 

or those containing bones.

INSTRUCTIONS FOR USE

BEFORE USE:

 -Make sure that all the product’s packaging has 

been removed.

 -

Before using the product for the first time, clean 

the parts that will come into contact with food in 

the manner described in the cleaning section.

USE:

ASSEMBLING

 -Unroll the cable completely before plugging it in.

JUICE TAP (L)

 -

It can be fixed onto the juice outlet, simply close 

the tap while juicing until the juicing bowl is 

approximately 1/2 full. Then open the juice tap 

allowing the juice flow into the juice pitcher/jug. 

The juice tap can also be effect on reducing 

froth and foaming in some juice & self clean.

-

IMPORTANT: Prior to asembling the juicer, 

please check this point : at the main Body of 

the juicing bowl there is a rubber stopper (M) 

(see fig 1). When in place, the Rubber stop

-

per ensures all the juice only exits via the 

juice outlet (H). Before juicing always ensure 

that the rubber stopper (M) is firmly in place

 -Put the juicer bowl (E) on the base (F) Inserting 

the slot and rotating slightly clockwise to stop 

(until faced arrows)

 -Place the strainer (D1) into the spinning brush 

(D2), align the arrow on the strainer and keep 

in line with the arrow on the juicing bowl, then 

insert strainer together with the spinning brush 

into the juicing bowl. When the arrows are 

correctly aligned the strainer and spinning brush 

will lock in place

 -

Put the juice auger (C) into the filter (D1). Push 

down and turn until it drops into position

 -Place the feeding tube (B) onto the juice bowl 

(E), making sure it is well fitted. To do it, align 

the arrow (with open lock) on the feeding tube 

(B) with the arrow on the juicing bowl (E)  tur-

ning clockwise , toward the closed lock position 

until arrows are aligned 

-

ATTENTION: If the auger (C) is not fully 

inserted, the cover will not close properly. 

Make sure the auger is well placed, turning 

and pressing down

 -If feeding tube is not well closed, device won’t 

operate properly