Taurus LIQUAJUICE PRO, Manual

Attention:

 If the auger (C) is not fully inserted, the cover will 

not close properly. Make sure the auger is well 

placed, turning and pressing down

- If feeding tube is not well closed, device won’t 

operate properly.

Use

- Wash the fruit and /or vegetable and cut them 

into pieces that fit into the feeding tube.

- Please make sure that the switch is turned at 

“O” before to connect to the power.

- Connect the appliance to the mains.
- Put the juicer cup and residue cup under the 

juice and dregs spout

- The switch has 3 positions: (Fig 1)
ON- starts the machine and juicing process
STOP- is the central position of the button. It 

stops the appliance
REV- is REVERSE.  It is a function to be used 

when something is stuck in the juicer and it 

needs to be unclogged. Finger should keep 

pressing this button while it start working.

- Prepare the material you wish to juice. The 

slow juicer is designed to juice many different 

materials

-T he necessary preparation will be different 

depending on the used materials

- If you use small mouth juicing, ensure juice 

material is cut small portion for optimal juice 

extraction

- Each portion should easily fall down the hopper 

chute without the need for force

-I f big mouth juicing, ensure the diameter of the 

fruit is less than 5.5 cm

- Turn the appliance on, by turning the control 

knob to setting “ON”

- Insert  pre- cut pieces slowly in the feeding tube 

and allow juicer have time to work. 

- Don’t overstuff the hopper or force food in
- Only use the aid of the pusher when necessary
- Remark: If you process a large quantity of fruit, 

you must periodically clean the filter and remove 

the remains of the pulp.

Safety thermal protector:

- The appliance has a safety device, which pro-

tects the appliance from overheating.

- If the appliance turns itself off and does not 

switch itself on again, disconnect it from the 

mains supply, and wait for approximately 15 

minutes before reconnecting. If the machine 

does not start again seek authorised technical 

assistance.

NOTES:

- This product is only used for extract juice.
- Peel only the ingredients with thick skin such as 

citrus fruits, bananas, pineapples, melon and 

so on.)

-Remove the kernel from the fruits such as plums, 

peaches, cherries, apricots and so on)

- Other fruit with soft peel should be washed be-

fore extracting such as apples, carrots, grapes, 

strawberry and so on.)

- Never put fruit kernel, excessively hard foods 

(ice cubes, sugar cubes), extremely fibrous food 

or meat into your juicer because they would 

damage the filter net and pusher.

-Switch “ON” stand for rotating clockwise, switch 

R stands for rotating reversely, switch “O” 

stands for stop. When there is some fruits be 

stuck between filter net and pusher, please turn 

the switch to speed “R” to make the fruit exit, 

then turn the switch to ON for extracting.

- Slowly put the fruit into the feeding chute slowly, 

leaving the appliance to work

- Only use pusher assistance when necessary

NOTES:

- Please do not put your fingers or other objects 

to the feeding chute is blocked, please use the 

pusher or other fruit slice to push and remove 

the stuck fruit. If it still won´t work, stop the 

machine and clean up the stuck fruit.

- Turn the switch to “O” if the juice cup or dregs is 

full, please also turn off the machine if there is 

no fruit. Empty the cup and clean the filter net 

and feeding chute for the next extracting.

Once you have finished using the appliance:

- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.

How to disassemble and clean the unit

- Switch off the unit
- Unplug the appliance from the mains.
- Twist the hopper anticlockwise then lift off. Lift 

the bowl straight up to remove from the base

- Disassemble the parts from the juicing bowl in 

the following order: 

- Auger (C), Filter (D1), Spinning brush (D2), 

Juice bowl (E)