Taurus LIQUAJUICE PRO, Manual

- Connect the appliance to a base with an earth 

socket withstanding a minimum of 10 amperes.

- The appliance’s plug must fit into the mains 

socket properly. Do not alter the plug. Do not 

use plug adaptors.

- Place the appliance on a horizontal, flat, stable 

surface.

- Do not use the appliance if the cable or plug is 

damaged.

- If any of the appliance casings breaks, immedia-

tely disconnect the appliance from the mains to 

prevent the possibility of an electric shock.

- Do not use the appliance if it has fallen on the 

floor, if there are visible signs of damage or if it 

has a leak.

- Keep the working area clean and well lit. Clutte-

red and dark areas invite accidents.

- Do not wrap the power cord around the applian-

ce.

- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged 

or tangled cables increase the risk of electric 

shock.

- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for 

signs of damage, and if the cord is damaged, 

the appliance must not be used.

- Do not touch the plug with wet hands.
- Do not touch any of the appliance’s moving 

parts while it is operating.

Use and care:

- Fully unroll the appliance’s power cable before 

each use.

- Do not use the appliance if the parts are not 

properly fitted.

- Do not use the appliance if the switch does not 

work.

- Do not move the appliance while in use.
- This appliance is for household use only, not 

professional, industrial use.

- Store this appliance out of the reach of children 

and/or those with reduced physical, sensory or 

mental abilities or those unfamiliar with its use

- To push the food, always use the food pusher. 

Never use your fingers or other accessories.

- Never leave the appliance connected and unat-

tended if is not in use. This saves energy and 

prolongs the life of the appliance.

- Do not use the appliance for more than 15 

minutes at a time. In case of operate in cycles, 

allow the appliance a resting period of at least 

10 minutes between each cycle. Under no cir-

cumstances should the appliance be operated 

for more time than necessary.

- Do not use the appliance with frozen goods, ice 

or those containing bones.

- Any misuse or failure to follow the instruc-

tions for use renders the guarantee and the 

manufacturer’s liability null and void.

Instructions for use

Before use:

- Make sure that all the product’s packaging has 

been removed.

- Before using the product for the first time, clean 

the parts that will come into contact with food in 

the manner described in the cleaning section.

Use:

Assembling

- Unroll the cable completely before plugging it in.

Juice Tap (L)

- it can be fixed onto the juice outlet, simply close 

the tap while juicing until the juicing bowl is 

approximately 1/2 full. Then open the juice tap 

allowing the juice flow into the juice pitcher/jug. 

The juice tap can also be effect on reducing 

froth and foaming in some juice & self clean

Important:

- Prior to asembling the juicer, please check this 

point : at the main Body of the juicing bowl there 

is a rubber stopper (N) (see fig 2). When in 

place, the Rubber stopper ensures all the juice 

only exits via the juice outlet. Before juicing 

always ensure that the rubber stopper (N)  is 

firmly in place

- Put the juicer bowl (E) on the base (F) (Inserting 

the slots)

- Place the strainer (D1) into the spinning brush 

(D2), align the dot on the strainer keep in line 

with the arrow on the juicing bowl, then insert 

strainer together with the spinning brush into 

the juicing bowl. When the dots are correctly 

aligned the strainer and spinning brush will lock 

in place

- Put the juice auger (C) into the filter (D1) and 

turn until it drops into position

- Put the feeding tube (B) onto the juice bowl (E), 

making sure it is well fitted. To do it, align the 

arrow on the feeding tube (B) with the arrow on 

the juicing bowl (E)   turning, toward the lock 

position