Taurus Mixing Chef Compact, Instructions For Use Manual

APPLIANCE TYPE 

APPLIANCE MODEL  

DESCRIPTION

A Transparent lid 
B Motor body 
C Bowl 
D Accessories mouting 
E Couple/uncouple button 
F Speed selector 
G Whisk 
H Mixing beater 
I Dough hook 

USE AND CARE

Extend unroll the appliance’s power cable 
before each use. 
Do not use the appliance if its accessories are 

not properly fitted. 

Do not use the appliance if the accessories 
attached to it are defective. Replace them 
immediately. 

Do not use the appliance if the on/off switch 

does not work. 
Do not move the appliance while in use. 
Do not turn the appliance over while it is in use 
or connected to the mains. 
Do not force the appliance’s work capacity. 
Store this appliance out of reach of children 
and/or persons with physical, sensory or 
reduced mental or lack of experience and 
knowledge.
Use the appliance and its accessories and 
tools in accordance with these instructions, 
taking into account the working conditions and 
the work to be performed. Use the appliance 

for operations different from those intended 

could result in a hazardous situation. 
Do not use the appliance for more than 5 
minutes at any one time. Allow to cool before 
subsequent use. 

INSTRUCTIONS FOR USE 

BEFORE USE

Make sure that all products’ packaging has 
been removed. 

Before using the product for the first time, 

clean the parts that will come into contact with 
food in the manner described in the cleaning 
section. 
Prepare the appliance according to the function 
you wish to use: 

USE

Extend the cable completely before plugging 
it in. 
Connect the appliance to the mains. 
Press the couple/uncouple button (E) to raise 
the upper part. (Fig. 1). 
Fix bowl on to the base and, lock it as 
arrowhead denotes. (Fig. 2). 
Fix the transparent lid (A) to avoid splashes on 

machine’s arm and check it is well fixed. 

Fix whisk (G), mixing beater (H) or dough hook 
(I) as desired in the accessories mounting and 

turn clockwise until it stays well fixed. (Fig. 3). 

Press the couple/uncouple button and push 
the upper part downwards until the button is 
returned to its original position. (Fig. 4). 
Turn the appliance on, by using the speed 
selector. 

To avoid a fierce start up of the appliance, it 
is advisable to start off from the lowest speed 

position and, once the appliance has been 
switched on, progressively increase the speed 
to the desired position. 

ELECTRONIC SPEED CONTROL

The speed of the appliance can be regulated 
by using the speed regulator control (F). This 
function is very useful, as it makes it possible 
to adapt the speed of the appliance to the type 
of work that needs to be done. 

The speed control can be used for the desired 

EN   

(Original instructions)