Use and care:
- Fully unroll the appliance’s power
cable before each use.
- Do not use the appliance if its ac-
cessories are not properly fitted.
- Do not use the appliance if the ac-
cessories attached to it are defective.
Replace them immediately.
- Do not use the appliance if the on/
off switch does not work.
- Do not move the appliance while
in use.
- Do not overload the appliance’s
weight capacity.
- Do not apply any additional pressu-
re on the appliance while it is in use.
- Do not force the appliance’s work
capacity.
- Unplug the appliance from the
mains when not in use and before
undertaking any cleaning task.
- This appliance is for household use
only, not professional, industrial use.
- This appliance is intended for adult
use. Ensure that this product is not
used by the disabled, children or
people unused to its handling.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- This appliance should be stored
out of reach of children and/or the
disabled.
- Never leave the appliance unatten-
ded while in use.
- Never rest the appliance into a
surface while in use.
- Do not use the appliance for more
than 3 continuous programmes.
Leave it standing to cool for 3 to 5
minutes before reuse.
- Pay special attention during the
assembly and disassembly of blades,
as they are sharp and could cause
harm.
Service:
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer’s
liability null and void.
Instructions for use
Before use:
- Remove the appliance’s protective
film.
- Ensure that the selected tension on
the voltage selector coincides with
the tension of the mains.
- Before using this product for the
first time, it is advisable to test it
without food.
- Before using the product for the
first time, clean the parts that will
come into contact with food in the
manner described in the cleaning
section.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Press down security lever (I) to lift
machine arm (Fig.1)
- Fix antisplash lid (B) on machine’s
arm, trun anticlockwise and check it
is well fixed.
- Fix bowl (C) on to the base and, lock
it as arrowhead denotes. (Fig.2)
- Fix beater (J), mixer (K) or dough
hook (L) as desired in locking switch
and trun anticlockwise until it stays
well fixed (Fig.3)
- Press down security lever (I) while
pushing down machine’s arm until
security lever (I) returuns to initial
