Taurus Optima Magnum 6, Manual

- Ensure that the voltage indicated on the rating 

label matches the mains voltage before plug-

ging in the appliance.

- Do not use the appliance if the cable or plug is 

damaged.

- Connect the appliance to a socket that can 

supply a minimum of 10 amperes.

- Do not leave the appliance out in the rain or 

exposed to moisture. If water gets into the 

appliance, this will increase the risk of electric 

shock.

- If any of the appliance casings breaks, immedia-

tely disconnect the appliance from the mains to 

prevent the possibility of an electric shock.

- Do not use the appliance if it has fallen on the 

floor, if there are visible signs of damage or if it 

has a leak. 

- As an additional protection to the electrical 

supply for the appliance, it is advisable to have 

a differential current device with a maximum 

sensitivity of 30 mA. Ask for advice from a com-

petent installer.

- Do not touch the plug with wet hands.
- Take the necessary measures to avoid starting 

the appliance involuntarily.

- Do not touch any of the appliance’s moving 

parts while it is operating.

- Before using the appliance ensure that the blade 

is properly fixed in place. 

USE AND CARE:

- Fully unroll the appliance’s power cable before 

each use.

- Do not use the appliance if the parts or acces-

sories are not properly fitted.

- Do not use the appliance if it is empty.
- Do not use the appliance if the on/off switch 

does not work.

- Do not turn the appliance over while it is in use 

or connected to the mains.

- Do not overload the appliance’s weight capacity. 
- Disconnect the appliance from the mains when 

not in use and before undertaking any cleaning 

task

- This appliance is intended for adult use. Ensure 

that this product is not used by the disabled, 

children or people unused to its handling.

- This appliance can be used by people unused 

to its handling, disabled people or children aged 

from 8 years and above if they have been given 

supervision or instruction concerning use of the 

appliance in a safe way and understand the 

hazards involved.

- Cleaning and user maintenance shall not be 

made by children unless they are older than 8 

and supervised

-During emptying and cleaning the jar, take care 

on handling the sharp cutting blades.

- This appliance is not a toy. Children should be 

supervised to ensure that they do not play with 

the appliance.

- This appliance should be stored out of reach of 

children and/or the disabled.

- Keep the appliance in good condition. Check 

that the moving parts are not misaligned or jam-

med and make sure there are no broken parts 

or anomalies that may prevent the appliance 

from operating correctly.

- Never leave the appliance connected and unat-

tended if is not in use. This saves energy and 

prolongs the life of the appliance.

-Do not forget to place the sealing ring on the 

blade unit . Otherwise, leakage may occur.

-Do not run the jar blender for more than 2 minu-

tes at a time, waiting at least 1 minute before 

running the appliance again.

-This product is not designed to work with hot 

liquid. Please do not mix hot liquid in the jar 

blender. 

-To crush ice cubes, put no more than 4 ice cubes 

at one time. If you wish to add more ice, pull 

out the measuring cup and insert the ice cubes 

consecutively. 

INSTRUCTIONS FOR USE:

USE:

-Fit the jar onto the motor body.
-Put the ingredients, after having first chopped 

them into small piece, into the jar with liquid (do 

not exceed the maximum capacity marked)

-Put the measuring cup in the lid.
-Put the lid on the jar; make sure it is properly 

fixed in place.

-Ensure the blade fixing ring is fixed properly to 

the jar (by turning counterclockwise) before 

putting on the motor body. (Fig.1)

-Place the jar onto to the motor unit until it fits 

properly into place. (Fig.2)

-Connect the appliance to the mains.
- Choose desired speed and start blending. 
-If you wish to add more ingredients pull out the 

measuring cup

-Add the ingredients and replace the measuring 

cup.

-To stop the appliance set the speed back to “0”.