Once you have finished using the
appliance:
-Select the “0” position at the speed selector.
-Turn the jar blender counter closewise and lift
it from the motor body.
-Unplug the appliance from the mains.
-Clean the appliance.
“Turbo” function
-The appliance works in highest speed to
achieve optimal performance.
-Turn this button to operate and release the
button when you wish to stop operating.
“Ice-Crush” Function (*)
-This function gives optimal result for ice-
crushing, up to desired snowy level.
-It is recommended to operating cycles of 3
seconds and repeat the same cycle until you
achieve the optimal result.
Mill Accessory (**)
-Open the lid by turning it in clockwise
direction.
-Put the ingredient into the grinder bowl.(only
dry ingredients). Do not overfill the bowl.
-Close the lid by turning counter clockwise
until the lock clicks into place. (Fig.3)
-Place the lid onto the grinder bowl. Turn the
mill unit clockwise until the lock clicks into
place. (Fig.4)
-Connect the appliance to the mains.
-Choose desired speed to start grinding.
-To stop the appliance set the speed back
to “0”.
Once you have finished using the
appliance:
-Select the “0” position at the speed selector.
-Turn the mill unit counter closewise and lift it
from the motor body.
-Turn the lid clockwise to open it.
-Unplug the appliance from the mains.
-Clean the appliance.
Cleaning
- Unplug the appliance from the mains and
allow to cool before starting any cleaning.
- Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Do not let water or any other liquid get into
the air vents to avoid damage to the inner
parts of the appliance.
- Never submerge the appliance in water
or any other liquid or place it under running
water.
- During the cleaning process, take special
care with the blades, as they are very sharp.
- It is advisable to clean the appliance
regularly and remove any food remains.
- If the appliance is not in good condition
of cleanliness, its surface may degrade
and inexorably affect the duration of the
appliance’s useful life and could become
unsafe to use.
- The following pieces may be washed in a
dishwasher:
- Jar
- Jar lid
- Measuring cup
Summary of Contents for Optima
