Taurus PULSAR ECO TURBO, Manual

professional or industrial use.

- This appliance should be stored out of reach 

of children and/or those with reduced physical, 

sensorial or mental abilities or who are unfamiliar 

with its use.

- Make sure that dust, dirt or other foreign objects 

do not block the fan grill on the appliance.

- Use the appliance, its accessories and tools in 

accordance with these instructions. Take working 

conditions and job to be carried out into consi-

deration. Using the appliance for anything other 

than its intended use can create hazards.

- Do not operate on areas which contain metal 

objects such as nails and/or screws.

- Never vacuum hot or sharp objects (cigarette 

butts, ash, nails, etc.).

Service:

- Any misuse or failure to follow the instruc-

tions for use renders the guarantee and the 

manufacturer’s liability null and avoid. 

Instructions for use

Before use:

- Make sure that all the product’s packaging has 

been removed.

Vacuuming function:

- Fit the hose unit to the vacuum cleaner’s air 

intake. (Fig. 1)

- To take off the vacuum hose, turn the hose to 

the left and pull outwards (Fig. 2).

Insertion of accessories into the appliance’s 

grip:

- The appliance’s grip is designed in such a way 

that it allows the insertion of the following acces-

sories: (use the combination that best meets your 

requirements).

- Extendable extension tube: Designed to provide 

access to surfaces which are out of reach and 

make floor cleaning comfortable, its length can be 

adjusted by using the adjustment control. 

- Vacuum cleaner base: Specially designed for 

cleaning floors (both rugs, carpets and hard 

floors), its base has a retractable brush that can 

be adjusted to two heights for greater efficiency 

on these floors. It is advisable to have the brush 

out for hard floors and the brush in for rugs and 

carpets.

- Crevice nozzle: specially designed for getting 

into cracks and difficult corners.

- Upholstery brush: Especially suitable for clea-

ning textile surfaces.

Use:

- Take the length of cable required out of the 

housing. (M)

- Connect the appliance to the mains.

- Turn the appliance on, by using the on/off switch 

(G)

Electronic power control:

-The power of the appliance can be regulated by 

using the power regulator control.(S) This function 

is very useful, as it makes it possible to adapt the 

power of the appliance to the type of work that 

needs to be done.

Once you have finished using the appliance:

- Turn the appliance off, using the on/off switch. 

(G)

- Unplug the appliance to the mains.

- The cable housing allows the cable to be stored 

as well as extract the length of cable necessary 

to operate the device, avoiding risk of accident 

situations.

- Retract the cable by pressing the roller cable 

button and guide the cable into the appliance. (F)

- Clean the appliance.

Carry handle/s:

- The device has a handle on the upper part so it 

can be transported easily and comfortably.(H)

Parking position:

- This appliance has one parking position for 

comfortable and straightforward storage.

- To use the horizontal parking position, fix the 

break pad hook to the hook situated on the rear 

side of the appliance (Fig. 3).

Cleaning

- Disconnect the appliance from the mains and let 

it cool before undertaking any cleaning task. 

- Clean the appliance using a damp cloth with a 

few drops of detergent and then dry it.

- Do not use solvents, or products with an acid or 

base pH such as bleach, or abrasive products, for 

cleaning the appliance.

- Do not submerge the appliance in water or any 

other liquid, or place it under a running tap.

Emptying the dust box:

- Empty the vacuum deposit when dust is visible 

though the transparent walls, when it is full, or 

when the vacuum cleaner does not work to its 

full potential. Disconnect the dust box from the 

appliance. (Fig. 4)

Manual Pulsar Eco Turbo.indb   10

11/7/16   10:34