STEAM STATION WITH BOILER
SLIDING X-PRO
7.5
DESCRIPTION
A
Steam hose
B
Anti-slip base
C
Bottom support
D
Power cable
E
Anti-limescale drain cap
F
Cable storage
G
Steam hose storage
H Water
tank
I
Lock button
J
Sole
K
Iron skirt
L
Iron ready indicator light
M Steam
trigger
N
Mode selection button
O On/O
ff
button
P
Saving mode button
Q
Low water light
R
Descaling indicator light
S Water
fi
lling aperture
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
Fully extend the appliance’s power cable before
each use.
Do not switch the appliance on without water.
Do not use the appliance if the on/o
ff
switch does
not work.
Do not turn the appliance over while it is in use or
connected to the mains.
To keep the non-stick treatment in good condition,
do not use metal or pointed utensils on it.
Respect the MAX and MIN levels.
Disconnect the appliance from the mains when not
in use and before undertaking any cleaning task.
Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental
or lack of experience and knowledge.
Do not store or transport the appliance if it is still
hot.
It is advisable to use distilled water, especially if
the water in your area contains clay or if it is “hard”
(containing lime or magnesium).
Check that the safety cap screwed on tightly befo-
re switching on the appliance.
Before each use, make sure that the product
valve/s are not blocked.
Make sure water tank is perfectly
fi
tted before star-
ting to use the appliance.
Never leave the appliance connected and unatten-
ded if is not in use. This saves energy and pro-
longs the life of the appliance.
Do not use the appliance on any part of the body
of a person or animal.
Do not use the appliance to dry textiles of any kind.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products’ packaging has been
removed.
Some parts of the appliance have been lightly
greased. Consequently, the
fi
rst time the applian-
ce is used a light smoke may be detected. After a
short time, this smoke will disappear.
FILLING WITH WATER:
It is essential to have
fi
lled the deposit with water
to be able to work with steam.
Detach the deposit from the appliance or open the
fi
lling hatch cover.
Fill the container respecting the MAX and MIN le-
vel.
Insert the tank back into its housing, making sure
that it is properly seated.
When the steam station needs more water or the
minimum water level has been reached, the low
water light (Q) will illuminate in red.
USE:
Extend the cable completely before plugging it in.
Connect the appliance to the mains.
Turn the appliance on, by using the on/o
ff
button
(O).
The pilot light (L) and de the mode selection button
(N) will
fl
ash blue during 3min.
When the mode selection button and the indicator
light stop
fl
ashing, it indicates that the appliance
has reached the ideal temperature (1st temperatu-
re range) and is ready for use.
Select the function you want the appliance to per-
EN
(Original instructions)
SSB2800_MANUAL.indb 8
SSB2800_MANUAL.indb 8
13/10/2022 13:03:20
13/10/2022 13:03:20
