Taurus Super-S LCM, User Manual

  Taurus Super-S LCM                                                                                                Introduction 

1.5  Detailed View 

1.5.1  Front View 

To turn on the device, press and hold the 
power button for 1 second and then let go.  
 
To turn it off, press and hold the power 
button for 3 seconds and then let it go again.  
 
Wait at least 5 seconds after turning off the 
power, before turning it back on, or otherwise 
it will not work. 

LED/Button 

Status 



  Power button; blue = power on 

HDD1/2 



  Green = Data access (read/write) 



  Red = Error or empty drive bay  

Rebuild 



  OFF = HDD status normal 



  Yellow = Rebuilding data 

Select 



  Select setup menu or mode 

OK 



  Confirm current option or enter setup menu 

1.5.2  Rear View 

 = Security lock slot 

 = Power receptacle 

eSATA = External SATA port 

FW800 = FireWire 800 port 

FW400 = FireWire 400 port 

USB 2.0 = USB 2.0 High Speed port 

RAID Switch 

RAID Mode 

RAID mode can be set via LCD display 
Switch position: 1 up, 2 down 

RAID mode is locked according to LCD setup 
Switch  position: 1 up, 2 up 

RAID 1 (not possible to set RAID mode via LCD) 
Switch position: 1 down, 2 up 

RAID 0 (not possible to set RAID mode via LCD) 
Switch position: 1 down, 2 down 

Page 2