Français
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- The tank cover, filter cone and tank
can be easily separated from the
motor base.
- To clean the non-drip spout, remove
it from its housing in the reservoir.
- They can be cleaned easily with
cold water under the faucet and a
little detergent.
- To replace the non-drip spout in its
housing follow the steps indicated in
this manual (Fig. 2)
- It is recommended that these
elements be cleaned immediately
after use.
- The motor base should never be
immersed in water nor exposed to a
direct flow under the faucet.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems
arise. Do not try to dismantle or
repair without assistance, as this may
be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
Ecology and recyclability of the
product
- The materials of which the
packaging of this appliance consists
are included in a collection,
classification and recycling system.
Should you wish to dispose of them,
use the appropriate public recycling
bins for each type of material.
- The product does not contain
concentrations of substances that
could be considered harmful to the
environment.
- Should you wish to dispose of the
product once its working life has
ended, take it to an authorised waste
agent for the selective collection of
waste from electric and electronic
appliances.
This appliance complies with the Low
Voltage Directive 73/23/EC and with
the Electro Magnetic Compatibility
Directive 89/ 226/EC
