X10.5 Pro SMART
19
Step 9:
Assemble of upper handles
a) Loosen the eight pre-mounted screws (M8xp1.25x16mm)(142) from the right and left
swivel arm (8+9).
b) Plug the right upper handle (7) on the right swivel arm (9) with four screws
(M8xp.125x16mm)(142).
c) Repeat the step for the left side.
Step 10:
Assemble swivel arm sleeve
a) Mount the swivel arm sleeve (46+47) on the right swivel arm (9) with four screws
(M5xp0.8x15mm) (100).
b) Repeat the process for the left side.
Step 11:
Assemble pedals and bottle holder
a) Mount the bottle holder (36+37) on the console mast (4) with the two pre-mounted
screws (M5xp0.8x30mm)(101).
b) Mount the left pedal (59) on the middle
of the left pedal arm (12) with four screws
(M8xp1.25x10mm)(105).
c) Place the anti-slip mat (60) on the left pedal
(59).
d) Repeat steps b+c for
the right side.
Finally check if all screws
and nuts are tightened.
