Taurus TITANIUM RT-BS 75, Instruction Manual

c. 

Avoid accidental starting. Ensure the switch is in 

  the off-position before plugging in.

 Carrying 

  power tools with your finger on the switch or 
  plugging in power tools that have the switch 
  on invites accidents.

d.

Remove any adjusting key or wrench before 

  turning the power tool on.

 A wrench or a key left 

  attached to rotating part of the power tool may 
  result in personal injury. 

e. 

Do not overreach. Keep proper footing and 

  balance at all times.

 This enables better control 

  of the power tool in unexpected situations. 

f. 

Dress properly. Do not wear loose clothing or 

  jewellery. Keep your hair, clothing and gloves 
  away from moving parts.

 Loose clothes, 

  jewellery or long hair can be caught in moving 
  parts. 

g. 

If devices are provided for the connection of 

  dust extraction and collection facilities, ensure 
  these are connected and properly used.

 Use of 

  these devices can reduce dust-related hazards.

4. Power tool use and care

a. 

Do not force the power tool. Use the correct 

  power tool for your application. 

The correct 

  power tool will do the job better and safer at the 
  rate for which it was designed.

b

. 

Do not use the power tool if the switch does not 

  turn it on and off.

 Any power tool that cannot be 

  controlled with the switch is dangerous and must 
  be repaired.

c. 

Disconnect the plug from the power source 

  and/ or the battery pack from the power tool 
  before making any adjustments, changing 
  accessories, or storing power tools.

Such 

  preventive safety measures reduce the risk 
  of starting the power tool accidentally.

d. 

Store idle power tools out of the reach of 

  children and do not allow persons unfamiliar 
  with the power tool or these instructions to 
  operate the power tool.

 Power tools are 

  dangerous in the hands of untrained users.

e. 

Maintain power tools. Check for misalignment 

  or binding of moving parts, breakage of parts 
  and any other condition that may affect the 
  power tools operation. If damaged, have the 
  power tool repaired before use.

 Many accidents 

  are caused by poorly maintained power tools. 

f. 

Keep cutting tools sharp and clean.

 Properly 

  maintained cutting tools with sharp cutting 
  edges are less likely to bind and are easier to 
  control. 

g.

Use the power tool, accessories and tool bits 

  etc. in accordance with these instructions and 
  in the manner intended for the particular type 
  of power tool, taking into account the working 
  conditions and the work to be performed.

 Use 

  of the power tool for operations different from 
  those intended could result in a hazardous 
  situation.

1. GENERAL SAFETY RULES

  WARNING!

Read all instructions

 Failure to 

  follow all instructions listed below may result 
  in electric shock, fire and/or serious injury. The 
  term ’’power tool’’ in all of the warnings listed 
  below refers to your mains-operated (corded) 
  power tool or battery-operated (cordless) power 
  tool.

SAVE THESE INSTRUCTIONS

1. Work area

a. 

Keep work area clean and well lit.

Cluttered and 

  dark areas invite accidents. 

b. 

Do not operate power tools in explosive 

  atmospheres, such as in the presence of 
  flammable liquids, gases or dust

. Power tools 

  create sparks which may ignite the dust or fumes. 

c. 

Keep children and bystanders away while 

  operating a power tool.

 Distractions can cause 

  you to lose control.

2. Electrical safety

a.

Power tools plugs must match the outlet. 

  Never modify the plug in any way.

 Do not use 

  any adapter plugs with earthed (grounded) 
  power tool. Unmodified plugs and matching 
  outlets will reduce risk of electric shock. 

b. 

Avoid body contact with earthed or grounded 

  surfaces such as pipes, radiators, ranges and 
  refrigerators

. There is an increased risk of electric 

  shock if your body is earthed or grounded. 

c. 

Do not expose power tools to rain or wet 

  conditions.

 Water entering a power tool will 

  increase the risk of electric shock. 

d.

Do not abuse the cord. Never use the cord 

  for carrying, pulling or unplugging the power 
  tool. Keep cord away from heat, oil, sharp edges 
  or moving parts

. Damaged or entangled cords 

  increase the risk of electric shock. 

e.

When operating a power tool outdoors, use an 

  extension cord suitable for outdoor use.

 Use of 

  a cord suitable for outdoor use reduces the risk 
  of electric shock. 

f.

If operating a power tool in a damp location 

  is unavoidable, use a residual current device 
  (RCD) protected supply.

 Use of an RCD reduces 

  the risk of electric shock.

3. Personal safety

a. 

Stay alert, watch what you are doing and use 

  common sense when operating a power tool. 
  Do not use a power tool while you are tired or 
  under the influence of drugs, alcohol or 
  medication.

 A moment of inattention while 

  operating power tools may result in serious 
  personal injury. 

b.

Use safety equipment. Always wear eye 

  protection.

 Safety equipment such as dust 

  mask, non-skid safety shoes, hard hat, or hearing 
  protection used for appropriate conditions will 
  reduce personal injuries. 

5

After Sales Support

EMAIL: service.australia@einhell.com

TEL: 1300 922 271