Taurus TITANIUM RT-BS 75, Instruction Manual

5. Service

a.

Have your power tool serviced by a qualified 

  repair person using only identical replacement 
  parts.

 This will ensure that the safety of the 

  power tool is maintained.

6. Recommendation

  We recommend that the tool always be supplied 
  via a residual current device with a rated 
  residual current of 30 mA or less.

Belt Sander Safety Warnings

a. 

Wear ear protectors when sanding.

 Exposure 

  to noise can cause hearing loss. 

b.

Use auxillary handle(s), if suppiled with the tool.

  Loss of control can cause personal injury.

c.

Hold power tool by insulated gripping surfaces, 

  when performing an operation where the sanding 
  accessory may come in contact with hidden 
  wiring or its own cord. 

Sanding accessory 

  contacting a “live” wire may make exposed metal 
  parts of the power tool “live” and could give the 
  operator an electric shock.

Do not loose this safety information.

Important!

When using equipment, a few safety precautions 
must be observed to avoid injuries and damage. 
Please read the complete operating manual with 
due care. Keep this manual in a safe place, so that 
the information is available at all times. If you give 
the equipment to any other person, give them 
these operating instructions as well. 
We accept no liability for damage or accidents 
which arise due to non-observance of these 
instructions and the safety information.

“Caution - Read the operating
instructions to reduce the risk of injury.”

Wear safety goggles.

Sparks generated during working 
or splinters, chips and dust emitted 
by the device can cause loss of sight.

Wear ear-muffs.

The impact of noise can cause damage 
to hearing.

Wear a breathing mask.

Dust which is injurious to health can be
generated when working on wood and
other materials. Never use the device 
to work on any materials containing 
asbestos!

2. Layout

1. Screw to adjust the additional handle

2. Additional handle

3. Setting wheel for belt speed

4. Locking button

5. ON/OFF switch

6. Connection for dust bag

7. Push button for moving sanding belt cover

8. Setting for sanding belt adjustment

9. Moving sanding belt cover

10. Drive rollers

11. Sanding plate

12. Clamping lever for sanding belt

13. Sanding belt

14. Dust collection box

15. Dust extractor adapter

16. Handle

3. Proper use

The belt sander is designed for sanding wood, iron, 
plastic and similar materials using the appropriate 
sanding belt. The machine is to be used only for its 
prescribed purpose. Any other use is deemed to be 
a case of misuse.

The user / operator and not the manufacturer will 
be liable for any damage or injuries of any kind 
caused as a result of this.

Please note that our equipment has not been 
designed for use in commercial, trade or industrial 
applications. Our warranty will be voided if the 
machine is used in commercial, trade or industrial 
businesses or for equivalent purposes.

4. Technical data

Mains voltage: 

230 V~ 50 Hz

Power input: 

850 W

Belt speed: 

300-400 m/min

Sanding belt size: 

75 x 533 mm

Protection class: 

II / 

Weight: 

3.2 kg

Sound and vibration

Sound and vibration values were measured in
accordance with EN 60745.

L

pA

 sound pressure level 

88 dB(A)

K

pA

uncertainty 

3 dB

L

WA

 sound power level 

99 dB(A)

K

WA 

uncertainty 

3 dB

6

After Sales Support

EMAIL: service.australia@einhell.com

TEL: 1300 922 271