UltraForce
23
Required parts for step 5:
Step 5:
Assembly covers
1.
Remove the two (M6 x 29mm) hex head screws from the upper cover plates of the perforated
metal plate with the Phillips wrench (included in delivery) and separate the front and back
sides.
Note:
The cover plate with the UltraForce logo belongs on the top on the front side.
2.
Mount the front side of the upper cover plate by moving it onto the frame on the edge of the
perforated metal plate. The cover plate may have to be pressed down slightly. Then mount
the backside of the upper cover plate. Mount the two parts with the previously loosened
hex head screws. Mount the backside of the upper cover on the frame with two hex head
screws (M4 x 20mm) through the external drill holes. Tighten the screws with the Phillips
wrench.
3.
Repeat steps 1 and 2 for
the lower cover plates.
Summary of Contents for UltraForce TF-UF
