UltraForce
26
Required parts for step 8:
Step 8:
Assembly swivel arms and cylinder
Place yourself behind the station.
1.
Slide the right swivel arm on the supportive bar on the upper crossbar of the main frame.
The label from the swivel arm points forward. Mount the right swivel arm with a large washer
and a hex head screw.
2.
Lift the knob from the right adjusting unit while you slide it to the swivel arm to number 20.
The markings are located on the front side of the swivel arm. The adjusting unit is displayed
to the right and left under the knob on the backside.
The markings for setting the weight must be visible through the opening on the front side
of the adjusting unit
.
3.
Place the lower end of the resistance cylinder on the supporting bar of the lower crossbar
from the main frame. Place the upper end of the cylinder to the outer right. Mount the lower
end of the cylinder with a small washer and a hexagon screw.
Summary of Contents for UltraForce TF-UF
