The bags of the packing machine lose
vacuum after sealing:
- Creases, crumbs, grease or liquids
may be released from the sealed area.
Before resealing, reopen the bag,
clean the top part and smooth the
area of the sealing band.
- Food with excess liquid may be
frozen before vacuum packing.
- Check whether any article with
sharp-pointed corners has been able
to puncture the bag.
The sealing band does not seal the bag:
- If the sealing band reheats and
melts the bag, lift the cover and allow
the packing machine to cool for a few
minutes.
- After 20 seconds have passed, try
again.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems
arise. Do not try to dismantle or repair
without assistance, as this may be
dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
For EU product versions and/or in case
that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packa-
ging of this appliance consists are
included in a collection, classification
and recycling system. Should you
wish to dispose of them, use the
appropriate public recycling bins for
each type of material.
The product does not contain
concentrations of substances that
could be considered harmful to the
environment
This symbol means that in
case you wish to dispose of
the product once its working
life has ended, take it to an
authorised waste agent for
the selective collection of
waste electrical and electronic
equipment (WEEE)
This appliance complies with Direc-
tive 2006/95/EC on Low Voltage and
Directive 2004/108/EC on Electro-
magnetic Compatibility.
Manual Vacpack.indb 22
22/03/12 15:45
