Taurus White & Brown DARKFIRE, Manual

- Push the mode selector to change from power 

mode to temperature mode in any moment. The 

LED display will show 200, indicating starting 

temperature is 200ºC or 210ºC. 

- To change the temperature level, just slide the 

finger through the slide control.

NOTE: Darkfire plate has 8 temperature levels 

equivalent to: 60ºC, 80ºC, 120ºC, 150ºC, 180ºC, 

200ºC, 220ºC, 240ºC.

NOTE: Darkfire Duo plate has 7 temperature 

levels equivalent to: 60ºC, 90ºC, 120ºC, 150ºC, 

180ºC, 210ºC, 240ºC.

TIMER FUNCTION

 -The appliance’s operating time can be control-

led.

 -

In order to do it, push the timer button. The 

LED display will show 0:30.

 -Use the Slide control to change the time 

settings.

 -

Slide your finger to add or subtract 10 minutes. 

 -Push at the ends of the slide control to add or 

diminish one minute. 

 -

Push again the timer button or wait 3 seconds. 

The value remaining will be alternating with the 

power level or temperature level you chose. 

 -To cancel this option push again the timer 

button or switch off the appliance. The timer 

indicator will shut off. 

SAFETY LOCK

 -

The safety lock position stops the on switch 

from activating; it prevents the appliance from 

being switched on accidentally.

 -

To activate the lock function, push during 3 se

-

conds the child lock button. The lock indicator 

will be activated and all the buttons despite the 

On/Off button will not be able to push. 

 -

To cancel this function, push during 3 seconds 

the lock button until the indicators goes off, or 

switch of the appliance. 

STAND-BY FUNCTION

 -

In order to save energy, the appliance passes 

to stand-by after 30 seconds if the user does 

not use it or the cooking accessory has been 

removed from the hob. 

ONCE YOU HAVE FINISHED USING THE 

APPLIANCE

 -

Stop the appliance using the on/off switch.

 -

Unplug the appliance from the mains.

 -

Clean the appliance.

ERROR CODES

The screen can show different Error codes.

E0 → The accessory you are using is not 

detected.

E1 → Don’t reach minimum voltage 

E2 → Too much Voltage for the plate.

E3 → Thermostat open

E4 → Thermostat broke

E5 → PCB Thermostat open

E6 → PCB Thermostat Broken

E7 → Interior temperature detection system 

broke. 

E8 → Internal error not determined.

E9 → Overheating. 

For E0, check if the accessory for cooking is 

induction compatible.

Fore E1 – E9, take the appliance to the closest 

Technical assistance Service.

CLEANING

 -Disconnect the appliance from the mains and 

allow it to cool before undertaking any cleaning 

task.

 -Clean the equipment with a damp cloth with a 

few drops of washing-up liquid and then dry.

 -

Do not use solvents, or products with an acid or 

base pH such as bleach, or abrasive products, 

for cleaning the appliance.

 -

Never submerge the appliance in water or any 

other liquid or place it under running water.

 -

It is advisable to clean the appliance regularly 

and remove any food remains.

RECYCLING

 -

These electrical products, cables, batteries, 

packaging, and the manual, should not be mi

-

xed with general household waste. For proper 

recycling, please take these products to your 

nearest Creative Housewares office where they 

will be accepted for recycling free of charge. 

 -

Alternatively, please contact your local au

-

thority or household waste disposal service 

for further details of your nearest designated 

collection point. Correct product disposal saves 

resources and prevents negative effects on 

human health and the environment. 

974671_IM.indd   13

2020/09/10   11:12:43