34
5.1 Design
5.1.1 Draw-Out Unit
The draw-out plate, with its racking mechanism, allows the VCB to be racked into or out of the service position to
test positions inside the switchgear. The main position indicating device is mechanically joined with the synchronizing
shaft of the ISM to reliably indicate the status of the ISM. The manual tripping device provides mechanical tripping for
the ISM.
A series of interlocks are provided to prevent malfunctions and to ensure maximum operator safety.
The spring-loaded contact system contains insulated contact arms which create an electrical connection between the
VCB main terminals and fixed contacts of the switchgear when the draw-out unit is in the service position.
The open design of the draw-out unit provides visual control of the main circuit‘s disconnection when it is in the test
position. The IP2X front cover of the VCB can be provided as a design option.
The auxiliary circuit cable contains ISM and DOU auxiliary circuit switches and optional interlock wiring. The auxiliary
multi-pin connector provides interconnection between the draw-out circuit breaker‘s secondary wiring and the
switchgear‘s auxiliary circuits compartment. The CM is installed in the switchgear‘s auxiliary circuits compartment to
provide all control, and the indication wiring is grouped in the low-voltage compartment of the switchgear. In case
of auxiliary supply loss, manual charging of the circuit breaker can be performed by connecting to the CM in the low
voltage compartment, excluding the necessity of operating inside the high-voltage compartment.
Withdrawable VCB
Figure 17
VCB15_LD8_16D 800 A, PCD 210 mm
1. Control wiring plug
2. Main contacts position indication
3. Manual trip button
4. Racking mechanism of draw-out plate
5. Fixing mechanism of draw-out plate
6. Main contact upper terminal
7. Main contact lower terminal
The draw-out plate auxiliary switches module is not shown in the Figure 17.
Summary of Contents for VCB15
