6
This Product Guide describes the withdrawable vacuum circuit breakers manufactured by Tavrida Electric.
Tavrida Electric circuit breakers are designed for rated voltages up to 24 kV.
Withdrawable vacuum circuit breakers are designed for indoor installation in air-insulated switchgear panels and
are intended to perform switching operations in network rated and faulty modes.
The breakers consist of the following main components:
• Indoor Switching Module (ISM) - The air-insulated ISM incorporates Tavrida Electric vacuum interrupters
incorporated in solid dielectric insulator controlled by per phase monostable magnetic actuators. No SF-6 or oil
insulation is used in the ISM.
• Control Module (CM) - The CM is a microprocessor-based controller that provides ISM operation,
protection and data logging functions.
This guide contains information about the circuit breaker‘s technical parameters, functionality and operating
principles. The purpose of the document is to provide necessary product information for application engineers and
technical personnel utilizing the equipment.
Other technical documents which cover the product:
Document name
Target audience
Purpose of the document
User Guide
Users providing installation,
commissioning and utilizing
installed equipment
Provide information on switching operations, required checkups
and maintenance, as well as service and disposal procedures.
Routine Test Certificate
Customer procurement
service
Provide information on supplied equipment serial numbers.
1.1 Abbreviations
AC
Actuator coil
AS
Auxiliary switch
BIL
Basic Insulation Level
EMC
Electromagnetic compatibility
CM
Control Module
CO
Close - Open operations cycle
DOU
Draw-Out Unit
Com
Common point of contact
I/O
Input / Output
ISM
Indoor Switching Module
LED
Light emitting diode
(P)MCB
Protective miniature circuit breaker
PS
Position switch
NA
Not applicable
NC
Normally closed contact
NO
Normally open contact
PCD
Phase center distance
USB
Universal Serial Bus
VCB
Vacuum Circuit Breaker
VI
Vacuum interrupter
Summary of Contents for VCB15
