Page 6 of 16
PLEASE NOTE
Tanks should not be lifted over houses, sheds or other property of value, nor should
they be lifted under low power lines
Tank sites that are cut out of sloping hills will require enough flat area for the truck to
be unloaded
Unloading on awkward and dangerous sites will be at the driver's discretion. Safe
and clear access is the responsibility of the property owner/builder.
7. INSTALLATION
Always ensure the installation location include the future landscaping provision allow for the diversion
of stormwater and surface waters away from the system.
The ABS1500 comes with 4 different heights to accommodate invert levels as deep as 1270mm
below ground level.
Width Height
Inlet Height
(from bottom of tank)
Inlet Depth
(from ground level)
Required
Base
(5-7mm Drainage
Gravel/ Sand)
Hole
Width
Hole
Depth
ABS1500 STD*
2425 2300
1530
670
100
3000
2300
ABS1500 Tall 300* 2425 2600
1530
970
100
3000
2600
ABS1500 Tall 400* 2425 2700
1530
1070
100
3000
2700
ABS1500 Tall 600* 2425 2900
1530
1270
100
3000
2900
* Refer to Excavation & Lifting Instructions on Pages 8 - 15
STANDARD TAYLEX ABS1500
2300 mm
1530 mm
670 mm
3000 mm
2425 mm
100 mm
100 mm
350 mm
Lifting
Holes
100mm
Inlet
Lifting
Holes
Top of tank to be a minimum
of 100mm above landscaped ground level