14
Who to Contact for Help and Trouble-
shooting
Before you call for help, and to avoid unnecessary call-out fees, check these
items:
1.
Is the power turned ON at the system?
2.
Are there lights ON in the panel face?
3.
Has a Safety Switch tripped in your main switchboard or sub
board?
4.
Has the irrigation hose become kinked, preventing the system
pumping out?
5.
If you have removable “Turf Keys” on your sprinklers, make
sure they are engaged properly, PUSH DOWN HARD (Surface
irrigation only).
6.
Is the irrigation outlet filter blocked? (If fitted)
Resetting your system
If you have identified an issue, once it is fixed you can try
resetting your
system
:
1.
Turn the system OFF, remove the 4 screws on the (Blue or Green)
blower box cover and turn the single power point
ONLY
OFF.
This will reset the program.
2.
Turn the system ON again using the single power point switch.
3.
If the system starts and operates correctly, observe the system
over the next few days for another ALARM event and discuss
it with your Service Agent.
4.
If the system goes back into ALARM mode, call your
Service Agent. Limit your water usage until the fault is
rectified.
Contact your local wastewater specialist.
taylex.com.au
1300 TAYLEX
