TW-357 REV E
22
Table 1.0 Menu System
1. Temperature
1.1 Thermocouple Select
1.2 Calibrate Temperature
1.3 Test Temperature System
2. Level Sensing
2.1 Test Level Sensors
2.2 Set Sensor Offset
2.3 Sensor Positions
2.3.1 Start Set Point
2.3.2 Stop Set Point
2.4 Sensor Type
2.5
Inch/Metric
3. Alarms
3.1 High-Temp Alarm #1
3.2 High-Temp Alarm #2
3.3 System Alarms
3.3.1 LN2 Supply Alarm
3.3.2 Sensor Error Alarm
3.3.3 Remote Alarm Timer
3.3.4 Lid Open Too Long
3.3.5
Thermocouple
Alarm
3.4 Test Alarms
3.4.1
Test
Audible
3.4.2
Test
Visual
3.4.3
Test
Remote
4. Logging
4.1 Dump Logs
4.1.1 Dump System Logs
4.1.2 Dump Error Logs
4.1.3 Dump Temp Log #1
4.1.4 Dump Temp Log #2
4.2 Error Logs
4.2.1 Sensor Error Logging
4.2.2 Low Supply Logging
4.2.3 Remote Alarm Logging
4.2.4OpenThermocouple
logging
4.2.5 High Temperature
Alarm Logging #1
4.2.6 High Temperature
Alarm Logging #2
4.3
System
Logs
4.3.1
Fill
Logging
4.3.2 Lid Action
Logging
4.3.3
User
Access
Logs
4.4 Temperature Logs
4.4.1 Thermocouple #1 Log Rate
4.4.2 Thermocouple #2 Log Rate
4.5 Erase Logs
4.5.1 Erase System Logs
4.5.2 Erase Error Logs
4.5.3 Erase Temperature Log #1
4.5.4 Erase Temperature Log #2
5. Security
5.1 Power-On Password
5.2 Menu Password
6. User Options
6.1 RS-232 Settings
6.1.1
Disable
RS-232
6.1.2 Set up RS-232
6.1.2.1Toggle
Handshaking
6.1.2.2 19200 Baud (Sets
the baud rate)
6.2 Control Options
6.2.1 Date & Time
6.2.2
Lid/Defog
Settings
6.2.2.1
Defog
Timer
6.2.2.2
Lid
Switch
Setup
6.2.2.3
Auto
Defog
6.2.2.4
Quick-Chill
6.2.3 Control By Temperature
6.2.3.1Disable
Temperature
Control
6.2.3.2Temperature
Control settings
6.2.3.2.1Control
Temperature
6.2.3.2.2 Control
Range
6.2.4
Freeze-Guard
Options
6.2.4.1
Valve Open
Duration
6.2.4.2
Frozen Valve
Sensor
6.2.4.3
Valve De-icing
6.3 Display Brightness
6.4 About this Control
